stopper mod

[dazlandy]

hi guys , looking to do the stopper mod ,.....i found 420 references to it in this section , but cant actually find the info i need without trawling thru ...can anyone direct me to the the info i need
cheers guys ,,,
daz

[VTRDark]

It's in the workshop knowlagebase
http://www.vtr1000.org/phpBB3/viewtopic ... 31&t=19416



(:-})

[dazlandy]

thanks ..thats perfect ....im new to the site and havnt quite mastered navigating my way round it yet .....
its a great write up , ..will be carrying out this mod v.soon
chhers
daz

[Jamoi]

Good luck, take your time and drink lots of tea, then it's almost impossible to much up ;)

I'm still learning to navigate around the forum... I've been lost here since I arrived! :-D

[AMCQ46]

I can't remember where you are based, but if you get into trouble or are confused, I will pm you a phone number and talk you through any questions.

Remember to make the little locking tool and see if the alternator inspectin covers come off before you settle down to do the job.
Also worth making sure you have almost emptied the tank, as 16l of fuel sloshing about makes it awkward to get on and off the bike without bumping it.

[VTRDark]

Argh the stopper mod queen speaks.

As for navigation for some reason most people miss the knowlagebase at the top of the workshop section. This can either be accessed from within the Workshop section or while on the Board Index there is a Subforum link to it under Workshop section.

(:-})

[wiltsdan]

Can recommend the stopper-mod
Just take your time, well worth doing, and the instructions are spot on