Would like to get one but struggling to decide which brand to go for?
Also not sure to go for be dark or light smoke? (To go with the fast yellow colour)
Opinions welcome please.

Ok by far & away the best make seems to be Fabbri...However they are quite dear new £ 70+ IIRC, but they fit well & are quite strong.Teach72 wrote:Looking through the site is is fair to say people recommend what they have?
Would like to get one but struggling to decide which brand to go for?
Also not sure to go for be dark or light smoke? (To go with the fast yellow colour)
Opinions welcome please.
alexmac wrote:hi,i fitted a puig double bubble,to my bike, very well made screen (german)
very defined bubble,with good wind protection and fit.
but not cheap,£70 + postage on ebay.
if you want to see what they look like on the vtr.
have a look at workshop page 10,where i posted some pic's.
atb alexmac.
What's wrong with LED? And in including indicators?cybercarl wrote:Yes don;t forget MRA screens they have a nice selection of various styles. As for clear light's, the majority of aftermarket ones are LED and include indicatorsClear with standard bulbs and no indicators are a little tricky to find. But as sheer luck would have it, I found a site last night that sell them. Scroll down about halfway down the page on the left.
http://www.jaws-motorcycles.co.uk/vtr.htm
(:-})
The built in ones wont pass MOT...apparently. However if you don't connect them it makes no difference.Teach72 wrote:What's wrong with LED? And in including indicators?cybercarl wrote:Yes don;t forget MRA screens they have a nice selection of various styles. As for clear light's, the majority of aftermarket ones are LED and include indicatorsClear with standard bulbs and no indicators are a little tricky to find. But as sheer luck would have it, I found a site last night that sell them. Scroll down about halfway down the page on the left.
http://www.jaws-motorcycles.co.uk/vtr.htm
(:-})