Fitting braided lines - difficult?

Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
User avatar
ging500
Posts: 540
Joined: Thu Mar 17, 2011 8:00 pm

Re: Fitting braided lines - difficult?

Post by ging500 »

Jamoi wrote:
suburban guerrlla wrote: ie suck on it
I doubt he will struggle with that bit!
Well you've had the virt experience, you should know!!
User avatar
Jamoi
Posts: 5651
Joined: Sun Jun 30, 2013 2:28 pm
Location: South East England

Re: Fitting braided lines - difficult?

Post by Jamoi »

ging500 wrote:
Jamoi wrote:
suburban guerrlla wrote: ie suck on it
I doubt he will struggle with that bit!
Well you've had the virt experience, you should know!!
Like a Dyson just after a cartridge change!! :lol:

I'd consider the brake line change to be a simple & straight forward job, but considering how vital they are, it would be worth waiting for some on-site guidance.

If you clean up the calliper pistons while you're at it, you'll like the difference :)
Jamie :wave:
User avatar
Ckennedy
Posts: 3560
Joined: Tue Jul 10, 2012 9:57 pm
Location: Leicestershire

Re: Fitting braided lines - difficult?

Post by Ckennedy »

As been said, don't do them if your unsure what you are doing. I have done bleeding brakes several times and it never gets any easier to get rid of the air from a dry system. Admittedly back bleeding does help but I often end up with my brake fluid on me than in the system :lol: I would offer a trip down to help but unsure when I could make it. Would have to be a Sunday but Mondays would be a lot easier for me but your at work. Failing that I'm insured to ride it. I could always collect and then bring back? :lol:

Jamie how much would you pay for the shock? :lol: :lol: :lol:
User avatar
Jamoi
Posts: 5651
Joined: Sun Jun 30, 2013 2:28 pm
Location: South East England

Re: Fitting braided lines - difficult?

Post by Jamoi »

:lol: :lol: :lol: :lol:

Name your price Chris, organised crime in it's most civilised form! :D
Jamie :wave:
User avatar
Ckennedy
Posts: 3560
Joined: Tue Jul 10, 2012 9:57 pm
Location: Leicestershire

Re: Fitting braided lines - difficult?

Post by Ckennedy »

Anything else you'd like? I'm sure we could do a deal :lol:
Salty Dog
Posts: 272
Joined: Wed Aug 28, 2013 5:25 pm

Re: Fitting braided lines - difficult?

Post by Salty Dog »

Is it possible to inject the brake fluid up the lines, from the bottom to top?

As is suggested for the clutch?

I bought a couple of very large syringes with clear tubing on the end to suck the fluid out of my reservoirs before topping up to bleed.
perhaps they could be used to push fluid up the system from the bottom?
3 out of 5 people are not the other 2.
User avatar
darkember
Posts: 2194
Joined: Wed Sep 08, 2010 10:48 pm
Location: South Wales Abergavenny

Re: Fitting braided lines - difficult?

Post by darkember »

Several more pointers: When bleeding never allow the reservoir to empty best to have a helper who will keep topping it up, using a syringe at the bleed nipple also helps & always bleed the longer of the 2 lines first.

Finally once happy with the feel & all is tightened leave the master reservoir open & pull the lever to the throttle grip, cable tie it there & leave overnight, this will allow any air to find a way out.

The job is not that hard, just be methodical, take your time & make sure everything is super clean :thumbup:
User avatar
lloydie
Posts: 20928
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Fitting braided lines - difficult?

Post by lloydie »

Come. On then what u got ?
I'm off this weekend so if you have all the bits I will pop over and show you
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Fitting braided lines - difficult?

Post by VTRDark »

Is it possible to inject the brake fluid up the lines, from the bottom to top?
That is what is known as a reverse bleed. Can get very messy though.

Some more info on bleeding brakes
http://www.vtr1000.org/phpBB3/viewtopic ... 98#p117435

(:-})
==============================Enter the Darkside
User avatar
MacV2
Posts: 18046
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Fitting braided lines - difficult?

Post by MacV2 »

cybercarl wrote:
Is it possible to inject the brake fluid up the lines, from the bottom to top?
That is what is known as a reverse bleed. Can get very messy though.

Some more info on bleeding brakes
http://www.vtr1000.org/phpBB3/viewtopic ... 98#p117435

(:-})
I always do it that way now, since having a lesson from Master Braker The Hon Jonesey.

If its messy Carl your doing something wrong...Even with wonkey wristitus it's a piece of piss.
Making up since 2007, sometimes it's true...Honest...
Virt
Posts: 6793
Joined: Wed Dec 12, 2012 12:35 pm
Location: Leicestershire

Re: Fitting braided lines - difficult?

Post by Virt »

Ckennedy wrote:As been said, don't do them if your unsure what you are doing. I have done bleeding brakes several times and it never gets any easier to get rid of the air from a dry system. Admittedly back bleeding does help but I often end up with my brake fluid on me than in the system :lol: I would offer a trip down to help but unsure when I could make it. Would have to be a Sunday but Mondays would be a lot easier for me but your at work. Failing that I'm insured to ride it. I could always collect and then bring back? :lol:

Jamie how much would you pay for the shock? :lol: :lol: :lol:
Die. :lol: It's not insured, surely you're only insured for vehicles that do have insurance with someone else? :wink: Also not taxed :lol:


The package consists of 2 long lines and a short line, so what does that mean? :lol:

Also, I have Jamie wrapped round my thumb. He'd give it back :wink:
Slowly approaching the more bikes than birthdays achievement
User avatar
MacV2
Posts: 18046
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Fitting braided lines - difficult?

Post by MacV2 »

Virt wrote:
Ckennedy wrote:As been said, don't do them if your unsure what you are doing. I have done bleeding brakes several times and it never gets any easier to get rid of the air from a dry system. Admittedly back bleeding does help but I often end up with my brake fluid on me than in the system :lol: I would offer a trip down to help but unsure when I could make it. Would have to be a Sunday but Mondays would be a lot easier for me but your at work. Failing that I'm insured to ride it. I could always collect and then bring back? :lol:

Jamie how much would you pay for the shock? :lol: :lol: :lol:
Die. :lol: It's not insured, surely you're only insured for vehicles that do have insurance with someone else? :wink: Also not taxed :lol:


The package consists of 2 long lines and a short line, so what does that mean? :lol:

Also, I have Jamie wrapped round my thumb. He'd give it back :wink:
Prob race set up on front (2 lines )+ rear brake line.
Making up since 2007, sometimes it's true...Honest...
Virt
Posts: 6793
Joined: Wed Dec 12, 2012 12:35 pm
Location: Leicestershire

Re: Fitting braided lines - difficult?

Post by Virt »

My Dad's visiting and he thinks otherwise, but I have no idea and doubt he has much of one either :lol:

I'll offer Lloyd some sex or something and get him to come over :wink:
Slowly approaching the more bikes than birthdays achievement
User avatar
Jamoi
Posts: 5651
Joined: Sun Jun 30, 2013 2:28 pm
Location: South East England

Re: Fitting braided lines - difficult?

Post by Jamoi »

Virt wrote:Also, I have Jamie wrapped round my thumb. He'd give it back :wink:
Image

<3
Jamie :wave:
User avatar
lloydie
Posts: 20928
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: Fitting braided lines - difficult?

Post by lloydie »

Do you have the double banjo bolt ?

http://bit.ly/19Dz3sX
Post Reply