top yoke conversion

[fabiostar]

AS above folks, iv changed to vfr800 bars so iv a set of .polished alloy bar risers with low rise Renthals if anybody fancies them,, bars are in good nick and risers are polished. simple to fit , just two holes drilled into the yoke, pop them on and thats it sorted. any bolts required are with them..

drop me a wee msg or pm me.. £30 posted to the sunny mainland.

iv also got a small Brembo resevoir that will go with it which aids clearance on the fairing.

cheers

[StormyRob]

You mention clearing the fairing.

Is that totally or is there some cutting required?

[fabiostar]

well mine was already cut when i bought the bike. they are a very low bend so i think the fairing mite still need a small trim along the lower edge..

[StormyRob]

Ok mate thank you very much

[fabiostar]

Ok mate thank you very much

no problems . i know a lot of folk dont like the old dremmel lol

[NZSpokes]

Are the VFR bars close to the same position as the riser bars?

[StormyRob]

Ok mate thank you very much

no problems . i know a lot of folk dont like the old dremmel lol

Haha I just don't like removing my fairing.

How much is actually taken off? Are we talking a few mm?

[fabiostar]

Ok mate thank you very much

no problems . i know a lot of folk dont like the old dremmel lol

Haha I just don't like removing my fairing.

How much is actually taken off? Are we talking a few mm?

more like an inch than mm ....

[fabiostar]

Are the VFR bars close to the same position as the riser bars?

the vfr bars are pretty much the same height as the top yoke set i had but with the vfr bars i can adjust them backwards to suit my wee short hairy arms...

[fabiostar]

BARS NOW SOLD>>>>>>>>>>>away to a good home.

[NZSpokes]

Are the VFR bars close to the same position as the riser bars?

the vfr bars are pretty much the same height as the top yoke set i had but with the vfr bars i can adjust them backwards to suit my wee short hairy arms...

Cool, thats what Im after as well.

[fabiostar]

Are the VFR bars close to the same position as the riser bars?

the vfr bars are pretty much the same height as the top yoke set i had but with the vfr bars i can adjust them backwards to suit my wee short hairy arms...

Cool, thats what Im after as well.

i find them a little better because as i said being on the little side i can pull the 800 bars back a little so im not draped over the tank so much otherwise id have kept them.. dam my short arms lol

[AMCQ46]

Short arms and deep pockets.... You sure we are not related

[Watty]

Short arms and deep pockets.... You sure we are not related

And custard bikes

[fabiostar]

Short arms and deep pockets.... You sure we are not related

Brother from another mother .....

custard all the way...