Exhaust hangers

[Seeker 77]

Anything considered guys, I only take a pillion now and then and would like something a bit more attractive to hang the exhausts from. Ebay throws up nothing except hideous 'GSXR-esque' chrome items with VTR cut into them!

[MacV2]

Anything considered guys, I only take a pillion now and then and would like something a bit more attractive to hang the exhausts from. Ebay throws up nothing except hideous 'GSXR-esque' chrome items with VTR cut into them!

Might have something, I'll have a look in the morn & get back to you...

...

...with me.

[MacV2]

Yep...These.



Could do with a clean in a couple of places, no major scratches, spose tou could polish them up if thats ya bag...

£20 posted ?

Frank.

[NZSpokes]

If he doesnt want em, postage depending I could be in.

[AMCQ46]

I got a set of them with my viper pipes, only problem is they allow a fair bit more side to side movement than the stock Honda ones, especially if you don't use the mounting lugs on the bottom of the footrests (which I don't as the rear sets don't have that fitting).

Lloydie was following me when I had them fitted and he said it was scary watching how much the pipes were moving as I was throwing the bike around the lanes... So just something to watch out for

[tony.mon]

They'd make good bungee points for camping gear!
The original ones are a bit too thick for normal bungee hooks.

[Seeker 77]

Thanks Frank I'll take them, will send you a PM

[MacV2]

Thanks Frank I'll take them, will send you a PM

[lloydie]

I got a set of them with my viper pipes, only problem is they allow a fair bit more side to side movement than the stock Honda ones, especially if you don't use the mounting lugs on the bottom of the footrests (which I don't as the rear sets don't have that fitting).

Lloydie was following me when I had them fitted and he said it was scary watching how much the pipes were moving as I was throwing the bike around the lanes... So just something to watch out for

Yep I thought they were ready to fall off !

[fabiostar]

Does anybody make hangers that dont let the cans bounce about? and raise the cans a bit?

[lloydie]

Does anybody make hangers that dont let the cans bounce about? and raise the cans a bit?

Yes Honda do :-)
I have a set on piggy that are very strong .tbere be made from Ali bar

[fabiostar]

Does anybody make hangers that dont let the cans bounce about? and raise the cans a bit?

Yes Honda do :-)
I have a set on piggy that are very strong .tbere be made from Ali bar

I never have a passenger on the storm so fancy ditching the standard ones but any iv seen seem to be made of paper

[bald_pig]

I'm going to grind off the footpegs, clean them up and polish or powdercoat them, should be spot on then