High lift link pipes and footrest spacers
High lift link pipes and footrest spacers
Hi I am a new member to the owners club and I am currently restoring a 2000 plate with high lift exhausts, but I would like to return it back to almost original, I am after a pair of link pipes for slip on cans and would swap the high lift pipes.
Many thanks guys.
Martin
Many thanks guys.
Martin
Re: High lift link pipes and footrest spacers
Welcome Martin to the forum, you should have no dramas finding someone who wants to do that swap! It might be useful to measure the internal diameters of the pipes at the front and rear as that will help someone to work out if they are going to be the right fit for their cans
Re: High lift link pipes and footrest spacers
Good thinking I'll get onto it, cheers.
- alanfjones1411
- Posts: 2800
- Joined: Thu May 21, 2015 3:33 pm
- Location: watford
Re: High lift link pipes and footrest spacers
Welcome to the forum. Them link pipes won't be in your way for long.
SO WHEN DOES THIS OLD ENOUGH TO KNOW BETTER KICK IN
Re: High lift link pipes and footrest spacers
any pictures of the link pipes ?... they mite be just what im looking for.
the older i get,the faster i was
Re: High lift link pipes and footrest spacers
The diameter of the can end is 51mm outside and header end is standard 48mm outside.
They are in good condition they also come with can holders and footrest spacers.
Martin
They are in good condition they also come with can holders and footrest spacers.
Martin
Re: High lift link pipes and footrest spacers
I tried to reply by my email link but unfortunately it would not work because I have to participate a bit more before this function works.
Cheers
Cheers
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: High lift link pipes and footrest spacers
Yep and it's the same to enter the sales and wants section .martinc wrote:I tried to reply by my email link but unfortunately it would not work because I have to participate a bit more before this function works.
Cheers
Think you need to have a read of the forum rules .
Re: High lift link pipes and footrest spacers
see if you can load some pics up i mite be interested in these. i take it its just the link pipes not the cans you want to change as id be keeping my own cans .
the older i get,the faster i was
-
- Posts: 69
- Joined: Wed Jul 29, 2015 11:04 pm
Re: High lift link pipes and footrest spacers
I'd be interested in these aswell !
Re: High lift link pipes and footrest spacers
High, here is a picture of what there is, it is the high lift link pipes the footrest spacers and the brackets for the cans, no cans supplied.
What I need is link pipes (X2) that connect to the standard header 48mm that will connect to after market cans 51mm.
ooops cant seem to attach picture, any ideas.
Thanks.
What I need is link pipes (X2) that connect to the standard header 48mm that will connect to after market cans 51mm.
ooops cant seem to attach picture, any ideas.
Thanks.
Re: High lift link pipes and footrest spacers
[url[url]imghttps://farm2.staticflickr.com/1662/25285055019_c7758d3f37_m.jpg][/img][/url]][/url]
I think this is the way to post pics.
cheers.
I think this is the way to post pics.
cheers.
Re: High lift link pipes and footrest spacers
Can you make it a bit smaller?