Knackered a terminal in rear light connector block

[freeridenick]

Anyone got any suggestions?

Tried Vehicle Wiring Products but they've not got the right terminal. Don't fancy trying to open up the clamps and re-using.

[MacV2]

Anyone got any suggestions?

Tried Vehicle Wiring Products but they've not got the right terminal. Don't fancy trying to open up the clamps and re-using.

Take a quick pic of the offending conector block.

I have a knackard cut to bits loom. I can chop off the required block with a few cm's of wire & you can splice it in.

Is it the flat white conector that goes into the rear light bulb socket ?

[StuartWags]

i have managed to push the pins out of the block and solder the wires on before. but they are delicate after that

[freeridenick]

Take a quick pic of the offending conector block.

I have a knackard cut to bits loom. I can chop off the required block with a few cm's of wire & you can splice it in.

Is it the flat white conector that goes into the rear light bulb socket ?

That's the one, white/green, brown and green wires iirc. Will take a picture tomorrow. Thanks for the offer.

[freeridenick]

Offending item

[MacV2]

Offending item

You have a PM Nick