SS Header Flange

Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
Post Reply
VTR Phoenix
Posts: 710
Joined: Sat Jan 16, 2016 12:07 pm
Location: Slough, Berkshire

SS Header Flange

Post by VTR Phoenix »

The headers on my storm are fine and rust/damage free. What isn't so good though is the flange that connects the headers to the engine. The front one is especially rusted and down to half the thickness it should be. I am in talking with a company about getting a two piece flange made up to replace the original. This means that it's just a case of cutting off the old one and replacing with the two piece flange. No having to cut or weld the pipe required to replace it. I'm hoping to have a couple of test flanges made out of SS and will trial fit them. They will be the same as the old Kawasaki 2 piece flange but made to fit the storm as I am providing an old flange to be used as a template.

Wondering if anyone on here would be interested if I were to get a batch made up? As it stands at the moment I have no idea of unit cost as stated still in the discussion stage at the moment.

These are what I am referring to.

http://www.ebay.co.uk/itm/142217662524? ... 5119.m1438
If it aint broke, get your bloody hands off it!
Top
User avatar
Wicky
Posts: 7895
Joined: Sat Feb 11, 2006 2:43 pm
Location: Colchester Essex
Contact:
Contact Wicky

Re: SS Header Flange

Post by Wicky »

:thumbup: Yes brilliant idea I'm on my 3rd header and it was always the flange fing that failed from disintegration rather than the header pipe.
It may be that your whole purpose in life is simply to serve as a warning to others.

ImageVTR Firestorm and other bikes t-shirts
Top
User avatar
AMCQ46
Posts: 16570
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: SS Header Flange

Post by AMCQ46 »

i would be interested to get SS flange to tidy up the front of the engine.

isn't flange a great word? :lol:
AMcQ
Top
User avatar
MacV2
Posts: 17476
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: SS Header Flange

Post by MacV2 »

AMCQ46 wrote:i would be interested to get SS flange to tidy up the front of the engine.

isn't flange a great word? :lol:
Yes but so is flapage... :crazy:
Making up since 2007, sometimes it's true...Honest...
Top
User avatar
MacV2
Posts: 17476
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: SS Header Flange

Post by MacV2 »

Sounds good I know Bloos one is a waffer thin...

I will have to check the other 3, Nue Red is OK as it has a different system on it...

Just a question tho will these be avaliable as single items ? as it's normaly just the front that is feked...
Making up since 2007, sometimes it's true...Honest...
Top
VTR Phoenix
Posts: 710
Joined: Sat Jan 16, 2016 12:07 pm
Location: Slough, Berkshire

Re: SS Header Flange

Post by VTR Phoenix »

I know what you mean Mac, the rear on might is near perfect, it's just the front, and yes I'll be selling them individually (one complete flange). Still waiting to hear back from them but I think I'll take a trip there to see them.
If it aint broke, get your bloody hands off it!
Top
User avatar
StormyRob
Posts: 1565
Joined: Sat Nov 07, 2015 7:33 am
Location: Northern Ireland. The place of legend

Re: SS Header Flange

Post by StormyRob »

Excellent idea. Those things just disintegrate!
If you don't try you never know if you can do it.
Top
VTR Phoenix
Posts: 710
Joined: Sat Jan 16, 2016 12:07 pm
Location: Slough, Berkshire

Re: SS Header Flange

Post by VTR Phoenix »

OK, so update is I've been to see them, asked for 2 to be made initially then a batch of 30. I think the fairest thing to do on here is split the cost between the 30 and just add p&p for anyone that wants any on here. FB and eBay however will be a different story. Once I get the price I'll post that up then any one that would like one or two give me a shout.
If it aint broke, get your bloody hands off it!
Top
User avatar
podman
Posts: 597
Joined: Tue Nov 15, 2016 4:04 pm

Re: SS Header Flange

Post by podman »

Also interested in one, thanks.
Top
User avatar
Steve97
Posts: 606
Joined: Thu Mar 18, 2010 12:33 pm

Re: SS Header Flange

Post by Steve97 »

yep count me in :thumbup:
Top
User avatar
8541Hawk
Posts: 2066
Joined: Sat Jul 21, 2012 5:21 am
Location: Bella Vista, AR

Re: SS Header Flange

Post by 8541Hawk »

Nice bit...... though seeing it makes me happy to be in sunny Ca.
I have never seen one of those even close to failing .... 8O
Loud pipes don't save lives, knowing how to ride your bike will save your life.
Top
eamonn
Posts: 148
Joined: Fri Nov 30, 2012 11:50 am
Location: Acton and Colchester

Re: SS Header Flange

Post by eamonn »

Put me down for one please.
Top
VTR Phoenix
Posts: 710
Joined: Sat Jan 16, 2016 12:07 pm
Location: Slough, Berkshire

Re: SS Header Flange

Post by VTR Phoenix »

Thanks for all the reply's, I'll make a list of those that want one and PM when they are ready. I'm hoping toward end of next week if the price and test piece is good. I'll still update this post as well though.
If it aint broke, get your bloody hands off it!
Top
baycat
Posts: 165
Joined: Sun Feb 07, 2016 6:05 pm
Location: Hertford

Re: SS Header Flange

Post by baycat »

need one bad please
Top
User avatar
artee
Posts: 203
Joined: Fri Feb 13, 2015 11:50 pm
Location: Rochdale Lancs

Re: SS Header Flange

Post by artee »

Put me down for one please.

Roger
Top
Post Reply

Return to “Workshop”