Hi....thinking about changing the exhausts to go level but need to keep rear footpegs...as most require these to be taken off, I was wondering what is available while keeping them....anyone using some or have advice please give it ....cheers
Sent from my SM-G930F using Tapatalk
Hi level exhausts
- alanfjones1411
- Posts: 2794
- Joined: Thu May 21, 2015 3:33 pm
- Location: watford
Re: Hi level exhausts
If you take a look at vtr's on eBay there is a couple of bikes with hi level cans and the foot pegs are kept. Some cans will need longer bolts and spacers.
SO WHEN DOES THIS OLD ENOUGH TO KNOW BETTER KICK IN
- StormyRob
- Posts: 1565
- Joined: Sat Nov 07, 2015 7:33 am
- Location: Northern Ireland. The place of legend
Re: Hi level exhausts
The Scorpions I sold recently had what is described above. Long thin spacers and long bolts. Looked like it worked well
If you don't try you never know if you can do it.
Re: Hi level exhausts
Yes Scorpions work very well with their way of bringing the rear footrests hangers out over the high-level link pipes as Rob mentions. Before anyone asks, no I don't have a yellow rear hugger
The photo at least gives you a better idea of how this works:-
Chris.