CNC Topyokes

General Bike chat
User avatar
Watty
Posts: 5583
Joined: Sat Apr 20, 2013 11:35 pm
Location: Barnard Castle, Co. Durham.

CNC Topyokes

Post by Watty »

Anyone any feedback/dealings with these guys?
https://www.topyokes.uk/product/honda-vfr750/
SH#T HAPPENS!!!!!!!!
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: CNC Topyokes

Post by VTRDark »

From what I can gather from those that have purchased from these guys the product is good but customer service is crap. Apparently they take the money and there can be a very very very long time before the product arrives. I think they must make them as and when an order is placed placed and don't keep them on the shelves ready to go.
==============================Enter the Darkside
User avatar
Watty
Posts: 5583
Joined: Sat Apr 20, 2013 11:35 pm
Location: Barnard Castle, Co. Durham.

Re: CNC Topyokes

Post by Watty »

VTRDark wrote: Sun Jun 03, 2018 5:28 pm From what I can gather from those that have purchased from these guys the product is good but customer service is crap. Apparently they take the money and there can be a very very very long time before the product arrives. I think they must make them as and when an order is placed placed and don't keep them on the shelves ready to go.
Mmm, not great feedback Carl! :(
SH#T HAPPENS!!!!!!!!
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: CNC Topyokes

Post by VTRDark »

http://www.vtr1000.org/phpBB3/viewtopic.php?t=31691

viewtopic.php?f=16&t=39708

Here's one you replied too :lol:
viewtopic.php?f=16&t=37112

So basically it depends on their production times and how much of a hurry your in.
==============================Enter the Darkside
User avatar
Watty
Posts: 5583
Joined: Sat Apr 20, 2013 11:35 pm
Location: Barnard Castle, Co. Durham.

Re: CNC Topyokes

Post by Watty »

:Argue:
VTRDark wrote: Sun Jun 03, 2018 5:45 pm http://www.vtr1000.org/phpBB3/viewtopic.php?t=31691

viewtopic.php?f=16&t=39708

Here's one you replied too :lol:
viewtopic.php?f=16&t=37112

So basically it depends on their production times and how much of a hurry your in.
Forgot about that post :lol:
Seems BTT used Moore speed and was bang on!!
SH#T HAPPENS!!!!!!!!
User avatar
TaxiDriver
Posts: 327
Joined: Sat Dec 30, 2017 8:15 pm
Location: The Red Rose

Re: CNC Topyokes

Post by TaxiDriver »

My bike came fitted witn a CNC tope yoke and its good quality.
I msg the guy regarding torque settings and he got back to me pretty quick.
He does state that texts are the way to go because of all the noise in the works.
User avatar
Watty
Posts: 5583
Joined: Sat Apr 20, 2013 11:35 pm
Location: Barnard Castle, Co. Durham.

Re: CNC Topyokes

Post by Watty »

TaxiDriver wrote: Sun Jun 03, 2018 6:46 pm My bike came fitted witn a CNC tope yoke and its good quality.
I msg the guy regarding torque settings and he got back to me pretty quick.
He does state that texts are the way to go because of all the noise in the works.
Cheers for that mate :thumbup:
SH#T HAPPENS!!!!!!!!
grumpyfrog
Posts: 1550
Joined: Thu Apr 14, 2011 1:22 pm
Location: Tayside

Re: CNC Topyokes

Post by grumpyfrog »

If you're lucky they have one in stock, if not then your looking at 8 weeks to get everything.
The product is fantastic, but yes they need to improve customer service.
Look at what Mags@port did to his. He used the flat bars conversion clip on things . I saw it last week and that's the road I'm going down this time.
Don't hassle me
I'll get there at some time
User avatar
Watty
Posts: 5583
Joined: Sat Apr 20, 2013 11:35 pm
Location: Barnard Castle, Co. Durham.

Re: CNC Topyokes

Post by Watty »

grumpyfrog wrote: Sun Jun 03, 2018 7:30 pm If you're lucky they have one in stock, if not then your looking at 8 weeks to get everything.
The product is fantastic, but yes they need to improve customer service.
Look at what Mags@port did to his. He used the flat bars conversion clip on things . I saw it last week and that's the road I'm going down this time.
Is that the LSL conversion?
SH#T HAPPENS!!!!!!!!
User avatar
popkat
Posts: 2804
Joined: Sat Apr 28, 2012 9:32 am
Location: Devon

Re: CNC Topyokes

Post by popkat »

There's this one but says cuts need to be made to screen and fairing.

https://www.bikermart.co.uk/Honda-VFR75 ... ighter-Kit


.
http://www.bidefordmotorcycles.co.uk
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
User avatar
Watty
Posts: 5583
Joined: Sat Apr 20, 2013 11:35 pm
Location: Barnard Castle, Co. Durham.

Re: CNC Topyokes

Post by Watty »

popkat wrote: Sun Jun 03, 2018 8:23 pm There's this one but says cuts need to be made to screen and fairing.

https://www.bikermart.co.uk/Honda-VFR75 ... ighter-Kit


.
Thanks Malc.
I'd like to see one fitted and see what cuts are required
SH#T HAPPENS!!!!!!!!
User avatar
Watty
Posts: 5583
Joined: Sat Apr 20, 2013 11:35 pm
Location: Barnard Castle, Co. Durham.

Re: CNC Topyokes

Post by Watty »

grumpyfrog wrote: Sun Jun 03, 2018 7:30 pm If you're lucky they have one in stock, if not then your looking at 8 weeks to get everything.
The product is fantastic, but yes they need to improve customer service.
Look at what Mags@port did to his. He used the flat bars conversion clip on things . I saw it last week and that's the road I'm going down this time.
You got a link to his post mate?
SH#T HAPPENS!!!!!!!!
mags@port
Posts: 80
Joined: Thu Mar 15, 2018 11:45 am
Location: Highlands

Re: CNC Topyokes

Post by mags@port »

https://trickbitzltd.co.uk

This is where I got my risers from, and they do vfr's also, plus you keep your current yoke installed.

viewtopic.php?f=30&t=42222

And link to what I did. Don't know if you need to cut the fairings on the vfr, depends on what bars you go for. Hope this helps
Break it, mend it, mod it, thrash it. If it's made then it's bettered by beer and goggles. Me bikes had Kwak ZZR, Suzuki TL1000s, Yama R1, Aprilia RSV. Now have VTR, Honda CB750 hand built brat/trickster, Yama XS750 and wee old Vespa.
User avatar
Watty
Posts: 5583
Joined: Sat Apr 20, 2013 11:35 pm
Location: Barnard Castle, Co. Durham.

Re: CNC Topyokes

Post by Watty »

mags@port wrote: Sun Jun 03, 2018 9:34 pm https://trickbitzltd.co.uk

This is where I got my risers from, and they do vfr's also, plus you keep your current yoke installed.

viewtopic.php?f=30&t=42222

And link to what I did. Don't know if you need to cut the fairings on the vfr, depends on what bars you go for. Hope this helps
Excellent mate, Thank You :thumbup:
SH#T HAPPENS!!!!!!!!
mik_str
Posts: 2149
Joined: Thu Apr 01, 2004 10:45 pm
Location: Montreal, Canada

Re: CNC Topyokes

Post by mik_str »

https://cognitomoto.com/

these guys do custom stuff. Am running one now, had it made to spec for my mix-and-match front end. Very nice stuff, quick delivery...
99 VTR1000F Firestorm, a.k.a. The Carbon Express
Post Reply