CNC Topyokes
CNC Topyokes
Anyone any feedback/dealings with these guys?
https://www.topyokes.uk/product/honda-vfr750/
https://www.topyokes.uk/product/honda-vfr750/
SH#T HAPPENS!!!!!!!!
Re: CNC Topyokes
From what I can gather from those that have purchased from these guys the product is good but customer service is crap. Apparently they take the money and there can be a very very very long time before the product arrives. I think they must make them as and when an order is placed placed and don't keep them on the shelves ready to go.
==============================Enter the Darkside
Re: CNC Topyokes
Mmm, not great feedback Carl!VTRDark wrote: ↑Sun Jun 03, 2018 5:28 pm From what I can gather from those that have purchased from these guys the product is good but customer service is crap. Apparently they take the money and there can be a very very very long time before the product arrives. I think they must make them as and when an order is placed placed and don't keep them on the shelves ready to go.
SH#T HAPPENS!!!!!!!!
Re: CNC Topyokes
http://www.vtr1000.org/phpBB3/viewtopic.php?t=31691
viewtopic.php?f=16&t=39708
Here's one you replied too
viewtopic.php?f=16&t=37112
So basically it depends on their production times and how much of a hurry your in.
viewtopic.php?f=16&t=39708
Here's one you replied too
viewtopic.php?f=16&t=37112
So basically it depends on their production times and how much of a hurry your in.
==============================Enter the Darkside
Re: CNC Topyokes
Forgot about that postVTRDark wrote: ↑Sun Jun 03, 2018 5:45 pm http://www.vtr1000.org/phpBB3/viewtopic.php?t=31691
viewtopic.php?f=16&t=39708
Here's one you replied too
viewtopic.php?f=16&t=37112
So basically it depends on their production times and how much of a hurry your in.
Seems BTT used Moore speed and was bang on!!
SH#T HAPPENS!!!!!!!!
- TaxiDriver
- Posts: 327
- Joined: Sat Dec 30, 2017 8:15 pm
- Location: The Red Rose
Re: CNC Topyokes
My bike came fitted witn a CNC tope yoke and its good quality.
I msg the guy regarding torque settings and he got back to me pretty quick.
He does state that texts are the way to go because of all the noise in the works.
I msg the guy regarding torque settings and he got back to me pretty quick.
He does state that texts are the way to go because of all the noise in the works.
Re: CNC Topyokes
Cheers for that mateTaxiDriver wrote: ↑Sun Jun 03, 2018 6:46 pm My bike came fitted witn a CNC tope yoke and its good quality.
I msg the guy regarding torque settings and he got back to me pretty quick.
He does state that texts are the way to go because of all the noise in the works.
SH#T HAPPENS!!!!!!!!
-
- Posts: 1550
- Joined: Thu Apr 14, 2011 1:22 pm
- Location: Tayside
Re: CNC Topyokes
If you're lucky they have one in stock, if not then your looking at 8 weeks to get everything.
The product is fantastic, but yes they need to improve customer service.
Look at what Mags@port did to his. He used the flat bars conversion clip on things . I saw it last week and that's the road I'm going down this time.
The product is fantastic, but yes they need to improve customer service.
Look at what Mags@port did to his. He used the flat bars conversion clip on things . I saw it last week and that's the road I'm going down this time.
Don't hassle me
I'll get there at some time
I'll get there at some time
Re: CNC Topyokes
Is that the LSL conversion?grumpyfrog wrote: ↑Sun Jun 03, 2018 7:30 pm If you're lucky they have one in stock, if not then your looking at 8 weeks to get everything.
The product is fantastic, but yes they need to improve customer service.
Look at what Mags@port did to his. He used the flat bars conversion clip on things . I saw it last week and that's the road I'm going down this time.
SH#T HAPPENS!!!!!!!!
Re: CNC Topyokes
There's this one but says cuts need to be made to screen and fairing.
https://www.bikermart.co.uk/Honda-VFR75 ... ighter-Kit
.
https://www.bikermart.co.uk/Honda-VFR75 ... ighter-Kit
.
http://www.bidefordmotorcycles.co.uk
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
Re: CNC Topyokes
Thanks Malc.popkat wrote: ↑Sun Jun 03, 2018 8:23 pm There's this one but says cuts need to be made to screen and fairing.
https://www.bikermart.co.uk/Honda-VFR75 ... ighter-Kit
.
I'd like to see one fitted and see what cuts are required
SH#T HAPPENS!!!!!!!!
Re: CNC Topyokes
You got a link to his post mate?grumpyfrog wrote: ↑Sun Jun 03, 2018 7:30 pm If you're lucky they have one in stock, if not then your looking at 8 weeks to get everything.
The product is fantastic, but yes they need to improve customer service.
Look at what Mags@port did to his. He used the flat bars conversion clip on things . I saw it last week and that's the road I'm going down this time.
SH#T HAPPENS!!!!!!!!
Re: CNC Topyokes
https://trickbitzltd.co.uk
This is where I got my risers from, and they do vfr's also, plus you keep your current yoke installed.
viewtopic.php?f=30&t=42222
And link to what I did. Don't know if you need to cut the fairings on the vfr, depends on what bars you go for. Hope this helps
This is where I got my risers from, and they do vfr's also, plus you keep your current yoke installed.
viewtopic.php?f=30&t=42222
And link to what I did. Don't know if you need to cut the fairings on the vfr, depends on what bars you go for. Hope this helps
Break it, mend it, mod it, thrash it. If it's made then it's bettered by beer and goggles. Me bikes had Kwak ZZR, Suzuki TL1000s, Yama R1, Aprilia RSV. Now have VTR, Honda CB750 hand built brat/trickster, Yama XS750 and wee old Vespa.
Re: CNC Topyokes
Excellent mate, Thank Youmags@port wrote: ↑Sun Jun 03, 2018 9:34 pm https://trickbitzltd.co.uk
This is where I got my risers from, and they do vfr's also, plus you keep your current yoke installed.
viewtopic.php?f=30&t=42222
And link to what I did. Don't know if you need to cut the fairings on the vfr, depends on what bars you go for. Hope this helps
SH#T HAPPENS!!!!!!!!
Re: CNC Topyokes
https://cognitomoto.com/
these guys do custom stuff. Am running one now, had it made to spec for my mix-and-match front end. Very nice stuff, quick delivery...
these guys do custom stuff. Am running one now, had it made to spec for my mix-and-match front end. Very nice stuff, quick delivery...
99 VTR1000F Firestorm, a.k.a. The Carbon Express