a bit of spondoness.

[StormyRob]

Good job mate! I am just glad she is still in one piece. Not so concerned about you

[fabiostar]

oh jesus ay lets not care about little old me ya vultures ..

no mad antics at the track. im no Rossi but the tyres reached the limit and give plenty of warning to wind my neck in.

[sirch345]

oh jesus ay lets not care about little old me ya vultures ..

no mad antics at the track. im no Rossi but the tyres reached the limit and give plenty of warning to wind my neck in.

Which tyres are you running on Blue out of interest

Chris.

[fabiostar]

oh jesus ay lets not care about little old me ya vultures ..

no mad antics at the track. im no Rossi but the tyres reached the limit and give plenty of warning to wind my neck in.

Which tyres are you running on Blue out of interest

Chris.

well i got a good deal on a set of metz, i think they are M5s ? il have to check, grand for the road but the rear let go a few times .. if i go again iv a spare wheel here with a sticky dunlop gp thingy on that i would pop on for the day.

[sirch345]

oh jesus ay lets not care about little old me ya vultures ..

no mad antics at the track. im no Rossi but the tyres reached the limit and give plenty of warning to wind my neck in.

Which tyres are you running on Blue out of interest

Chris.

well i got a good deal on a set of metz, i think they are M5s ? il have to check, grand for the road but the rear let go a few times .. if i go again iv a spare wheel here with a sticky dunlop gp thingy on that i would pop on for the day.

Perhaps that's not such a bad thing for the track after seeing how your bellypan was touching down
Don't go going out into your garage especially to check which tyre(s) you're running If you think about it next time you're out there, then great,

Chris.

[fabiostar]

turns out they are M3 metz.. just round black things lol.. as i said they are a grand road tyre and have done everything i have asked on the road but. they didnt suit a track, maybe as you say tho better that way instead of getting carried away.. the big girls not gona see to many tracks, it was more just to tick a box to have had it on track....

[sirch345]

turns out they are M3 metz.. just round black things lol.. as i said they are a grand road tyre and have done everything i have asked on the road but. they didnt suit a track, maybe as you say tho better that way instead of getting carried away.. the big girls not gona see to many tracks, it was more just to tick a box to have had it on track....

Thanks for the info Rob

"just round black things"

Chris.

[fabiostar]

for no other reason than i was caught riding around on my brass band. taken from facebook.







be a sh1t bike to do a bank job on

[sirch345]

Looking good Rob

I'm amazed how upright you look on the bike

Chris.

[fabiostar]

Looking good Rob

I'm amazed how upright you look on the bike

Chris.

the apex blade raised clipons make the world of difference to the riding position..

[VTRDark]

A couple of fantstic pictures there. Is the harbour one the same as before or have you been back there for another shot. You should get that framed for the mancave but the jacket needs removing in Photoshop as it takes the eyes focus away and it could do with a graduated neutral density.

Apex risers are on my shopping list but I havent decided whether to go for the 3" or 4".

[sirch345]

Looking good Rob

I'm amazed how upright you look on the bike

Chris.

the apex blade raised clipons make the world of difference to the riding position..

I realise photo's can be deceiving sometimes due to angles they are taken etc, but your riding position looks very similar to mine, and I have Renthal Ultra Low bars

Chris.

[fabiostar]

carl....its the same place i normally stop off at.....

bars wise both guys, these ones are the 3" rise and apart from a slight angle down they are close to ultra low flat bars to use

[sirch345]

bars wise both guys, these ones are the 3" rise and apart from a slight angle down they are close to ultra low flat bars to use

Doh, I don't know what I was thinking of course you know with the bar conversion on ole Yellow,

Chris.

[fabiostar]

bars wise both guys, these ones are the 3" rise and apart from a slight angle down they are close to ultra low flat bars to use

Doh, I don't know what I was thinking of course you know with the bar conversion on ole Yellow,

Chris.

i just got word back from the owner of old yellow and he is loving