New bike, no doubt a new project!

[TheBozBoz]

Finish work now until Tuesday! First job is motorbike forks. Yokes have a custom stem sorted so all good there, fit. Just need to adjust stops. Here I go...

Sent from my SM-A415F using Tapatalk

[TheBozBoz]

Couple of hours of cutting and tapping 4mm steel i have proper lock stops plus forks and wheel are in! I hope tomorrow i can rig up the fzs fairing frame before the inlaws turn up...

Sent from my SM-A415F using Tapatalk

[sirch345]

Good to see you are making more progress there

I wish you'd stop temping me with USD forks as they look great

Chris.

[TheBozBoz]

I have to admit, I've always liked my bikes black and a bit mean looking but the gold forks with the blue I'm really liking! I didn't get much done with the fairing but I've mocked it up, bit of a modding is needed. Firstly my fairing stay for the fzs600 is bent so im cutting it and rewelding with parts from a fzs1000 fairing stay i have which is not a direct replacement. Fingers crossed I'll get some done this week, weather looking nicer want to ride!!

Sent from my SM-A415F using Tapatalk

[fabiostar]

thats a sexy looking front end

[TheBozBoz]

Had an evening all to myself this week so obviously spent it sorting the bike. Sorted out the mirror bracket 'ears' then cracked on welding together a bracket to lift the fairing to a suitable position. My next task is to weld a bracket so the original vtr clocks can fit a standard fzs fairing stay.

Sent from my SM-A415F using Tapatalk

[TheBozBoz]

It fits!
Next jobs will be to either drop the rads by 10mm or 'push' the tops in by 10mm this is due to the cap fowling the fairing just. As I can't weld alu I'd prefer to do the least disruptive method. Meanwhile whist I ponder my next move I've been fitting handlebars and brakes etc. Planning on MOT next week as its expired whilst I've been doing all this!

Sent from my SM-A415F using Tapatalk

[sirch345]

Looking good

Chris.

[TheBozBoz]

Cheers Chris, I thought this might be of some use to someone who suffered with the riding position like me! I'm convinced this will be better. This is how I've finished up today.

Sent from my SM-A415F using Tapatalk

[TheBozBoz]

A very basic bracket for the clocks. Bolted to the existing frame so can be improved later. Next job is wiring loom route and maybe get rid of the ignition barrel

Sent from my SM-A415F using Tapatalk

[TheBozBoz]

I've been a busy boy, its 90% ready for MOT but as I can't get that done until after this week I'm going with a lightened flywheel and upgrading suspension and hopefully cans! Can't wait to ride! Still trying to figure out radiator position...

Sent from my SM-A415F using Tapatalk

[TheBozBoz]

Update! It passed its MOT...! New fabiostar flywheel makes a massive difference and the upright position now is good for my back! I've been riding it now for a couple of months as a fazer/storm/r1 hybrid. Fuelling still needs some work as it can be a pain to start and a fair few flat spots or maybe thats just a v twin thing??? Part of me just wants a fzs600 again. Worse point of this bike is the tank range, it is crap on the storm(as we all know)! I had a job in Essex where I could actually use my bike instead of the van, so from leaving home in east Sussex I'd fill up just before getting to site in Essex and then on the way home fill up just before my home for the next day. Not great!

Sent from my SM-A415F using Tapatalk

[fabiostar]

Update! It passed its MOT...! New fabiostar flywheel makes a massive difference and the upright position now is good for my back! I've been riding it now for a couple of months as a fazer/storm/r1 hybrid. Fuelling still needs some work as it can be a pain to start and a fair few flat spots or maybe thats just a v twin thing??? Part of me just wants a fzs600 again. Worse point of this bike is the tank range, it is crap on the storm(as we all know)! I had a job in Essex where I could actually use my bike instead of the van, so from leaving home in east Sussex I'd fill up just before getting to site in Essex and then on the way home fill up just before my home for the next day. Not great!

Sent from my SM-A415F using Tapatalk

nice to hear you are enjoying the flywheel have you any pictures of the bike as its sitting, that fairing looks great on it