Honda oil cooler pipes

[xeris]

These pipes I made some months ago, showing laser cut flanges welded to the tubes, the other end shows oil resistant flexible rubber tube held with stainless clips, I've since purchased a crimping machine with stainless crimps, these are much better, although the clips worked perfectly well.


The second photo shows crimped pipes compared to the old ones, ready for the engine sump fittings.

I'm guessing that you need the old set to harvest the fittings from? For the proper price, would you ship to the US?

I would, but would need a lot of info from you to even get a quote. PM me to start things off...

Thank you MacV2.

[acrmnsm]

OK I want these, mine are super rusty.
I need to do an oil change anyway.

[Potcee]

I could do with replacement oil cooler pipes ....on account that mine have just sprung a leak

I will pm you and I'm relatively local to you to

[MacV2]

I could do with replacement oil cooler pipes ....on account that mine have just sprung a leak

I will pm you and I'm relatively local to you to

You wont as you need 50 posts to have access to PM's.

However I will PM you which you should be able to read.

http://vtr1000.org/phpBB3/viewtopic.php ... 18#p506092

[MacV2]

I could do with replacement oil cooler pipes ....on account that mine have just sprung a leak

I will pm you and I'm relatively local to you to

You have a PM.

[Potcee]

Indeed I have received the pm

And correct I cannot pm anyone yet

Where are you based Mac ?

Sunday 30/6 is the day I will be removing the oil cooler pipes.

I've not interrogated the Haynes yet so not sure what gaskets and or seals I might also need to replace.

Cheers for the fast response Mac

[MacV2]

Indeed I have received the pm

And correct I cannot pm anyone yet

Where are you based Mac ? You can contact me via the email I sent...

Sunday 30/6 is the day I will be removing the oil cooler pipes.

I've not interrogated the Haynes yet so not sure what gaskets and or seals I might also need to replace.

Cheers for the fast response Mac

No gaskets just O-rings at both ends. reuse is fine but if you fail to put them back it will leak.

Sometimes they stay in place sometimes they come away with the pipe.

Just make sure you have them to re use. 2 per pipe. Top & bottom...

[Potcee]

Hi Mac,

I have tried a couple of times to email you but on the address you gave me but it throws up an error

The response from the remote server was:
552 1 Requested mail action aborted, mailbox not found

[MacV2]

Hi Mac,

I have tried a couple of times to email you but on the address you gave me but it throws up an error

The response from the remote server was:
552 1 Requested mail action aborted, mailbox not found

OK I wil PM you again... might have been a typo...

[MacV2]

Hi Mac,

I have tried a couple of times to email you but on the address you gave me but it throws up an error

The response from the remote server was:
552 1 Requested mail action aborted, mailbox not found

OK I wil PM you again... might have been a typo...

Sorted the missing m has been added...

[Potcee]

Hi Mac,

I have tried a couple of times to email you but on the address you gave me but it throws up an error

The response from the remote server was:
552 1 Requested mail action aborted, mailbox not found

OK I wil PM you again... might have been a typo...

Sorted the missing m has been added...

Cheers for that Mac I have sent you an email

[daz350]

Hi any more info if these are available to buy yet.As mine are well past there best and very rusty like most peoples are.

[MacV2]

Hi any more info if these are available to buy yet.As mine are well past there best and very rusty like most peoples are.

Daz I had 3 sets made, they have now all been sold. I'm waiting for the bods I sold them to to return their old ones to me so I can send them off to have some more made...