Braced in the usual places. Striped and powder coated a couple of years ago. All the bolts were replated in bright zinc. Data tagged with most of the rest of the kit still present. V5 in my name.
£300 ono, + P&P.
Braced frame, one of Roger's old ones
Moderator: VTRDark
-
freeridenick
- Posts: 1670
- Joined: Fri May 23, 2014 1:30 pm
- Location: Derbyshire
Braced frame, one of Roger's old ones
You do not have the required permissions to view the files attached to this post.
Last edited by freeridenick on Wed May 28, 2025 9:55 pm, edited 1 time in total.
Re: Braced frame, one of Roger's old ones
Hi Nick, to keep in with our Forum rules can you please add a price? and state if p&p is extra or included?
I am guessing this slipped your mind
Chris.
I am guessing this slipped your mind
Chris.
-
freeridenick
- Posts: 1670
- Joined: Fri May 23, 2014 1:30 pm
- Location: Derbyshire
Re: Braced frame, one of Roger's old ones
Oooh. This is going to get me in trouble.
Ok, if no-one else is interested - give it a few weeks - I'll pay you £220 and this would start me back on the Firestorm tuning track.
It's been an itch I'm trying not to scratch for a while.
I can build a scrap engine into a 120 bhp unit, and if I stuff a usd Blade fork set and a set of lightweight 6 spokes and a decent set of calipers and discs I might just chop the Tuono in.....
Ok, if no-one else is interested - give it a few weeks - I'll pay you £220 and this would start me back on the Firestorm tuning track.
It's been an itch I'm trying not to scratch for a while.
I can build a scrap engine into a 120 bhp unit, and if I stuff a usd Blade fork set and a set of lightweight 6 spokes and a decent set of calipers and discs I might just chop the Tuono in.....
It's not falling off, it's an upgrade opportunity.
-
freeridenick
- Posts: 1670
- Joined: Fri May 23, 2014 1:30 pm
- Location: Derbyshire
Re: Braced frame, one of Roger's old ones
Sounds like a good plan Tony.
Re: Braced frame, one of Roger's old ones
No problem Nick, thanks for adding those details 
Chris.
Re: Braced frame, one of Roger's old ones
tony.mon wrote: ↑Wed May 28, 2025 11:20 pm Oooh. This is going to get me in trouble.
Ok, if no-one else is interested - give it a few weeks - I'll pay you £220 and this would start me back on the Firestorm tuning track.
It's been an itch I'm trying not to scratch for a while.
I can build a scrap engine into a 120 bhp unit, and if I stuff a usd Blade fork set and a set of lightweight 6 spokes and a decent set of calipers and discs I might just chop the Tuono in.....
That sounds like an itch worth scratching Tony 
Chris.
-
Pete.L
- Forum Health And Safety Officer
- Posts: 7317
- Joined: Fri Sep 26, 2003 5:09 pm
- Location: Bristol
Re: Braced frame, one of Roger's old ones
You'd better grab that Penske shock whilst you are there.
and maybe a braced swinging arm.
Pete.l
and maybe a braced swinging arm.
Pete.l
My new ride is a bit of a Howler and I love to make her Squeal
Re: Braced frame, one of Roger's old ones
I thought the frame had the ears already, as well as the headstock bracing, but it doesn't.
I should have looked more carefully at the pics.
Apologies, Nick, I hope you find a buyer. It's a good starting point for a project.
I should have looked more carefully at the pics.
Apologies, Nick, I hope you find a buyer. It's a good starting point for a project.
It's not falling off, it's an upgrade opportunity.