Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
VTRBOY
Posts: 30 Joined: Wed Mar 26, 2003 11:01 pm
Location: Felixstowe, Suffolk (via sh1t creek)
Post
by VTRBOY » Sun Feb 29, 2004 10:29 pm
Being so hard up after splashing out on some much needed (in case the missus is reading) mods, I'm too skint to afford a workshop manual. I'm after the front and rear axle torque settings in case anybody has them to hand. Ta.
I've shaken Rossi's hand. Francis Rossi that is!!
iggy1966
Posts: 2052 Joined: Mon Jan 06, 2003 9:05 am
Location: Hull (Cottingham)
Post
by iggy1966 » Mon Mar 01, 2004 8:23 am
I have the manual on CD at home, I'll find out the settings and post them later tonight if you still need them.
Ian
"Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut."
VTRBOY
Posts: 30 Joined: Wed Mar 26, 2003 11:01 pm
Location: Felixstowe, Suffolk (via sh1t creek)
Post
by VTRBOY » Mon Mar 01, 2004 7:45 pm
Yep, I'm still after them. Thanks for your time.
I've shaken Rossi's hand. Francis Rossi that is!!
iggy1966
Posts: 2052 Joined: Mon Jan 06, 2003 9:05 am
Location: Hull (Cottingham)
Post
by iggy1966 » Tue Mar 02, 2004 8:32 am
VTR boy,
The torque settings for the axle's are.
Rear 93N-m (9.5kgf-m, 69lbf-ft)
Front 59N-m (6.0kgf-m, 43lbf-ft)
Any thing else just let me know.
Ian
"Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut."
RQ
Posts: 623 Joined: Wed Jul 09, 2003 10:31 pm
Location: Limerick , Ireland
Post
by RQ » Tue Mar 02, 2004 10:33 am
Ian,
Where did you get your hands on that CD, and are they readily available ?
Ronan.
essexbloke
Posts: 656 Joined: Wed Nov 13, 2002 12:29 pm
Location: Colchester, England
Post
by essexbloke » Tue Mar 02, 2004 12:57 pm
alternativly, they are always on e.bay.......(got mine from there for about £7.50)
VTRBOY
Posts: 30 Joined: Wed Mar 26, 2003 11:01 pm
Location: Felixstowe, Suffolk (via sh1t creek)
Post
by VTRBOY » Tue Mar 02, 2004 1:30 pm
Thanks iggy1966 appreciate your help.
I've shaken Rossi's hand. Francis Rossi that is!!
t00lkit
Posts: 146 Joined: Tue Jul 15, 2003 3:17 pm
Location: Sheffield
Post
by t00lkit » Tue Mar 02, 2004 7:35 pm
VTRBOY, RQ
I've sent you a PM re the CDs