Page 2 of 2
Re: Ho, ho, fekin, Ho
Posted: Tue Dec 18, 2018 12:44 am
by Varastorm
Kev L wrote: ↑Mon Dec 17, 2018 10:01 pm
AMCQ46 wrote: ↑Mon Dec 17, 2018 7:46 pm
Are you serious about the lathe Mc? Funnily enough I was having a conversation with one of my neighbours tonight and a mate of his had a stroke a couple of years ago and is now accepting he will never be able to use the lathe or drillpress and is looking to get rid. I said I’d keep an ear out so if you’re interested I’ll find out if there is a cost involved.
thanks Mac.... Folkstone and a bit pricy, but the correct spec I am looking for
Kev L wrote: ↑Mon Dec 17, 2018 10:03 pm
Sorry, that post is mixed up I’m on the piss with my brother and not functioning at 100%! Doh
Just read them & larffin my head off, confusion or what. Just wait till Santa reads this
Re: Ho, ho, fekin, Ho
Posted: Tue Dec 18, 2018 9:04 am
by tony.mon
Anyone killing a live tree for the baby Jesus or are you faking it?
Re: Ho, ho, fekin, Ho
Posted: Tue Dec 18, 2018 9:38 am
by AMCQ46
kevL, luckily I could understand the drunken rambling .... so yes, I would be interested, depending on the spec & size of the lathe. .... I don't want to be doing a Fabio and extending the garage to get a 10ft lathe bed in.
send me a PM with details when you sober up
Re: Ho, ho, fekin, Ho
Posted: Tue Dec 18, 2018 9:39 am
by AMCQ46
tony.mon wrote: ↑Tue Dec 18, 2018 9:04 am
Anyone killing a live tree for the baby Jesus or are you faking it?
killed a live one, but whos this jesus baby?
Re: Ho, ho, fekin, Ho
Posted: Thu Dec 20, 2018 12:28 pm
by MacV2
Kev, your crimble prezzie has arrived...
A bag of spanners, please note the King Richard, just for you...
Re: Ho, ho, fekin, Ho
Posted: Thu Dec 20, 2018 12:56 pm
by Kev L
You Sir, are a gentleman of the highest calibre.
Re: Ho, ho, fekin, Ho
Posted: Thu Dec 20, 2018 2:51 pm
by MacV2
Kev L wrote: ↑Thu Dec 20, 2018 12:56 pm
You Sir, are a gentleman of the highest calibre.
That'll be 914mm or 36'' in old money...
Mallet's Mortar...
https://en.wikipedia.org/wiki/Mallet%27s_Mortar
https://en.wikipedia.org/wiki/List_of_t ... by_caliber
Re: Ho, ho, fekin, Ho
Posted: Thu Dec 20, 2018 11:23 pm
by fabiostar
AMCQ46 wrote: ↑Mon Dec 17, 2018 5:18 pm
I have been OK, not angel good or evil bad .... so I would like to have a small myford lathe so I can spin my remaining nuts
Al get onto the myford and the drummond facecake sites, theres always loads for sale at decent money, a nice we ML7 would do the job grand.
i want a,,,i want a......i dont actually know what i want apart from my bike back on the road
nice new set of leather trousers would be nice as the ones i have are the same ones i got for my 19th birthday lol.
Re: Ho, ho, fekin, Ho
Posted: Fri Dec 21, 2018 7:07 am
by MacV2
fabiostar wrote: ↑Thu Dec 20, 2018 11:23 pm
AMCQ46 wrote: ↑Mon Dec 17, 2018 5:18 pm
I have been OK, not angel good or evil bad .... so I would like to have a small myford lathe so I can spin my remaining nuts
Al get onto the myford and the drummond facecake sites, theres always loads for sale at decent money, a nice we ML7 would do the job grand.
i want a,,,i want a......i dont actually know what i want apart from my bike back on the road
nice new set of leather trousers would be nice as the
ones i have are the same ones i got for my 19th birthday lol.
Still child size then...
Re: Ho, ho, fekin, Ho
Posted: Fri Dec 21, 2018 9:17 am
by fabiostar
lmao makes buying them cheaper
Re: Ho, ho, fekin, Ho
Posted: Fri Dec 21, 2018 9:43 am
by AMCQ46
fabiostar wrote: ↑Thu Dec 20, 2018 11:23 pm
Al get onto the myford and the drummond facecake sites, theres always loads for sale at decent money, a nice we ML7 would do the job grand.
I need to do that, but I hate using social media [its the social part I don't like]... but if it will save me money I need to do it.
ML7 is what I am looking at
Re: Ho, ho, fekin, Ho
Posted: Fri Dec 21, 2018 3:48 pm
by MacV2
Kev I had a rake through the bag o spanners & found these...
Top one you can use on the bloo one...
Middle one you can use on the new old bike...
Bottom one you can use on...
hehehehehe...
Re: Ho, ho, fekin, Ho
Posted: Fri Dec 21, 2018 7:13 pm
by fabiostar
AMCQ46 wrote: ↑Fri Dec 21, 2018 9:43 am
fabiostar wrote: ↑Thu Dec 20, 2018 11:23 pm
Al get onto the myford and the drummond facecake sites, theres always loads for sale at decent money, a nice we ML7 would do the job grand.
I need to do that, but I hate using social media [its the social part I don't like]... but if it will save me money I need to do it.
ML7 is what I am looking at
lmao dont worry Al ,the lathe world on social media is more lathe than social lol.... like grumpy.com. im starting to fit in just great
try and get one with as many tools as possible. its the bits and bobs that add up with these things but once bought they will last forever.
Re: Ho, ho, fekin, Ho
Posted: Fri Dec 21, 2018 8:11 pm
by MacV2
fabiostar wrote: ↑Thu Dec 20, 2018 11:23 pm
AMCQ46 wrote: ↑Mon Dec 17, 2018 5:18 pm
I have been OK, not angel good or evil bad .... so I would like to have a small myford lathe so I can spin my remaining nuts
Al get onto the myford and the drummond facecake sites, theres always loads for sale at decent money, a nice we ML7 would do the job grand.
Re: Ho, ho, fekin, Ho
Posted: Fri Dec 21, 2018 8:13 pm
by MacV2
AMCQ46 wrote: ↑Fri Dec 21, 2018 9:43 am
fabiostar wrote: ↑Thu Dec 20, 2018 11:23 pm
Al get onto the myford and the drummond facecake sites, theres always loads for sale at decent money, a nice we ML7 would do the job grand.
I need to do that, but I hate using social media [its the social part I don't like]... but if it will save me money I need to do it.
ML7 is what I am looking at
https://www.gumtree.com/search?search_c ... ion=uk&tl=