What's annoyed you today??

[agentpineapple]

soooo fecking pissed off, i took my abba stand attachments apart to bodge fit a 17mm socket, only to have misplaced an important attactment, so now the bikes not getting fixed and i can't use my abba stand unless i spend £20+ on new attacments......

and you know as soon as i order the attachments, the old one will turn up.....grrrrrr!

[lloydie]

Ha ha sounds like you need to get a tray when your working on the bikes ,
Use a tray for tools and nuts and bolts to keep them safe

[agentpineapple]

Ha ha sounds like you need to get a tray when your working on the bikes ,
Use a tray for tools and nuts and bolts to keep them safe

the stupid thing is I've got a magnetic tray and didn't use it, I've retraced my steps three times and still nothing.......argh!!!!!!!!!!

[AMCQ46]

Marty, I know that feeling............. we are in the process of selling our house, and MrsMcQ is on a tidy mission so it all looks great when people view the house.

net result is I cant find anything, and when I ask her where she might have hidden something, she denies all knowledge of touching it.......... so I eventually find my bike gloves up in the loft.........go figure why that makes sense.

I expect to get ready for Yorkshire on Friday only to find I cant find my helmet ........... and when I get back from Yorkshire I have fears that my garage will be emptied

[agentpineapple]

i'd never hear a bad word send against MrsMcQ, dangerous things come in small packages....

[lloydie]

i'd never hear a bad word send against MrsMcQ, dangerous things come in small female Scottish packages....

Fixed it [FACE WITH STUCK-OUT TONGUE AND WINKING EYE]

[AMCQ46]

you are correct............ some days I wait till she has gone to work and send her a text to complain about not being able to find anything........ I am not that brave

[bigtwinthing]

Ha ha sounds like you need to get a tray when your working on the bikes ,
Use a tray for tools and nuts and bolts to keep them safe

the stupid thing is I've got a magnetic tray and didn't use it, I've retraced my steps three times and still nothing.......argh!!!!!!!!!!

Is it on the side of the fridge

[tony.mon]

I have had two welders apply weld to my crankcases, neither of whom seem able to prevent coolant from falling out willy nilly.


(That's a technical term, by the way).

I am, and am likely to remain, annoyed.
However, technically, today ends in less than half an hour, tomorrow may be more palatable., let's see.

[Cadbury64]

I must get this off my chest. I can rebuild a VTR. I can strip my Norton to the bare frame, strip the engine down to the crank (it's bolt together) and build it back to running condition. I can even rebuild an Ossa Pioneer and make it run but, for the life of me, I can't make, an almost new, Weed Eater run for two season in a freaking row! I have a huge amount of trimming that needs doing. With the recent rains it's even worse. I need a dependable string trimmer or I won't be able to find my car in the tall grass. I have three of the fockers in my shop and each one has it's own demon. I have pulled the starter rope so much that one arm is bigger then the other and my chest feels like I am having heart trouble. I have worn a blister between two fingers on both hands! I have been into the carb, traced the fuel lines and cleaned it to within a inch of its life. I stink like premix and carb cleaner. It will run but not long. It will run really well if I pour premix down its gob but only until the gas treat runs out. I know I probably need to replace the gaskets but it's only a year old. I will order parts rather than buy another one of these piss poor devices.

I just hate these two stoke torture devices.

I had an anemic electric one for around the house but I burned it up. It just couldn't take the strain.

In my experience these little buggers hate stale fuel. My advice is get some fresh fuel but don't mix too much up. I've had the same arm exercise/blistering experience.



Sent from my iPhone using Tapatalk

[Wicky]

Welderly elders don't know what they're doing...

I have had two welders apply weld to my crankcases, neither of whom seem able to prevent coolant from falling out willy nilly.


(That's a technical term, by the way).

I am, and am likely to remain, annoyed.
However, technically, today ends in less than half an hour, tomorrow may be more palatable., let's see.

[agentpineapple]

fecking computers, took me 3hrs to try and sort out how to scan a document from my printer to my laptop, and don't get me started on logging into Microsoft, after three attempts of filling out tonnes of info, I get told I've maxed out my tries for today, come back in 24hrs....

[bigtwinthing]

Welderly elders don't know what they're doing...

I have had two welders apply weld to my crankcases, neither of whom seem able to prevent coolant from falling out willy nilly.


(That's a technical term, by the way).

I am, and am likely to remain, annoyed.
However, technically, today ends in less than half an hour, tomorrow may be more palatable., let's see.

thats not true, once I've welded something i leave a lump to hand ya coat on thats inniniotive i fink.

[fabiostar]

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaah wombles i hate bushes....??

was up at the nw200 watching the thursday evening races. sails home on the storm gets to my house. rides past the wifes car and my foot catches in a fuking stupid bush she planted last week. me,bikeand bush ends up in a heap on our sides in the garden


said bush at 10.45 has just been dug up and wombles clean over the hedge....


rant over...

[agentpineapple]

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaah wombles i hate bushes....??

was up at the nw200 watching the thursday evening races. sails home on the storm gets to my house. rides past the wifes car and my foot catches in a fuking stupid bush she planted last week. me,bikeand bush ends up in a heap on our sides in the garden


said bush at 10.45 has just been dug up and fooked clean over the hedge....


rant over...

when will women learn..........
I hope it's just damaged pride mate.