AP's project.....UPDATE

lloydie · Post by **lloydie** » Sun Jun 17, 2012 8:58 pm

its like a big jigsaw all the parts ready to be fitted but just cant be bothered .
as ive said before when its done it will be a nice bike even in blue

agentpineapple · Post by **agentpineapple** » Sun Jun 17, 2012 9:01 pm

lloydiecbr wrote:its like a big jigsaw all the parts ready to be fitted but just cant be bothered .
as ive said before when its done it will be a nice bike even in blue

you sir are to kind....

Kev L · Post by **Kev L** » Sun Jun 17, 2012 9:03 pm

Could be worse Marty you could be building a two wheel hearse like Lloydie.....

agentpineapple · Post by **agentpineapple** » Sun Jun 17, 2012 9:08 pm

sorry lloydie

lloydie · Post by **lloydie** » Sun Jun 17, 2012 9:15 pm

lloydie · Post by **lloydie** » Sun Jul 15, 2012 8:46 am

If the exhaust a badly damaged It might be time to go with the 2-1 exhaust and sell the titanium to help pay the repair bill . Just a thought !

agentpineapple · Post by **agentpineapple** » Sun Jul 15, 2012 9:11 am

tbh honest the exhaust isn't to bad, but i like the idea, i could get a single high level link pipe made up, then i'd just have to get a quality single carbon can....

if i could do it before the dyno.....mmmmmmmm

agentpineapple · Post by **agentpineapple** » Thu Jul 26, 2012 9:12 pm

fingers crossed tomorrow should see my bike a step closer to being finished, now you've stopped laughing, heres a few pictures of my new undertray/tail tidy/smallish numberplate, oh and a little bit of carbon wrap...........

i also hope to be putting on a new 19ltr fuel tank/ d.i.d chain/ 100% brighter headlight bulb/ blue headlight subframe and many more little bits and bobs.....
i'll be posting more pictures this weekend.....

VTRDark · Post by **VTRDark** » Thu Jul 26, 2012 9:17 pm

Too much Blue. I don't like those tail lights.

My chain tool pin/riveter is bent. Rather than me be bringing a hammer with me, I think it would be better to take the bike over the road and get him to rivet the link pins with a proper tool. They wont charge for a 1min job out of concern for your safety.

(:-})

Kev L · Post by **Kev L** » Thu Jul 26, 2012 9:27 pm

Have you still got the braced swingarm on Marty? You will need to have the chain riveted in place after it's threaded through the brace won't you?

lloydie · Post by **lloydie** » Thu Jul 26, 2012 9:30 pm

you would last a day around here with out getting pulled by the boys in blue with that plate

and make sure the r&g number plate light can not be seen from behind that will be an other tug
have you sorted the damage out yet bsm ?

agentpineapple · Post by **agentpineapple** » Thu Jul 26, 2012 9:40 pm

lloydiecbr wrote:you would last a day around here with out getting pulled by the boys in blue with that plate
and make sure the r&g number plate light can not be seen from behind that will be an other tug
have you sorted the damage out yet bsm ?

i've had someone look at the damage, tomorrow i hope to repair some of it, i've already replaced the mirror and indicator.

carl are you still bringing the rivet gun so i can repair the exhaust? if you could bring the ball hammer i would appreciate it mate, because of the plympic games lanes it would take tens mins for me to take the bike 100yds

hugeduck · Post by **hugeduck** » Thu Jul 26, 2012 9:46 pm

looking good that mate. +1 on the number plate, the first copper i went past gave me a 60 quid fine and made me sign something saying if i got caught again the DVLA would withdraw my registration completely, he had a piece of paper in his car with the requirements of a number plate, so i think theyve been told to clamp down on it

VTRDark · Post by **VTRDark** » Thu Jul 26, 2012 10:08 pm

carl are you still bringing the rivet gun so i can repair the exhaust? if you could bring the ball hammer

Will do mate. Forgot about the poxy Olympics, he will be closed over the road. That number plate is worse than the last one. Looks stupid. It should be on a car not a bike

Why not put the nice one on with the VTR100.org on it

(:-})

agentpineapple · Post by **agentpineapple** » Sat Jul 28, 2012 6:38 pm

heres some new pictures of the bike,
i'm happy with some of it and a little dissapointed with some of it aswell.
for example, i like the look of the rear lights, but the undertray they're mounted too doesn't seem to fit that well, and for some reason my single seat cover doesn't have a equal gap to the rear fairing that it used to have

all the led's work well but even with brand new resisters the flash rate is to fast
i'm very happy with the loom after carl repaired and re-routed it

the new chain is great aswell, i also like my new blue headlight subframe

i'm gutted i didn't get to fit the 19ltr tank, but the part i need is on order and should arrive next week, so not to long to wait.
then i'll be able to fit new fuel lines aswell.

tbh i'm not loving the big standard numberplate, but because i'll be at brands hatch tomorrow and theres bound to be lots of plod, i thought it best to put the original one on for now, oh and i balls'd up the numbering on the super small plate so i doubt it will ever get used

VTR1000.ORG

AP's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE

Re: BSM's project.....UPDATE