VTR1000.ORG

I don't bother with the clip and have taken it off completely. Don't see the point in it really as the force of the airbox held down holds the pipe tightly in place. Got no leaks or problems with it. I think Honda just put it there to make life awkward.

Very ingenious idea with the shoelace that Seb

(:-})

I must have little girly hands then

I don't have a problem with sed clip, although I do scratch a couple of mills worth of skin off tho.

It takes me longer to screw the 6 gold screws in that holds the air box down!

It'll grow back :-)

lloydiecbr wrote:

seb421 wrote:

lloydiecbr wrote:Just as you start to get the knack you be fitting a gutted airbox lol

i know bloody typical, I've tried it every which way in the past but just cant get my hands in the gaps, always one of the longest most time consuming jobs for me putting that bitch of a pipe on, cant wait for the Lloydie special

you'll be getting the mk1 tho :-)

Reading the Avatar legend I hope the Lloydie special doesn't involve KY mate! Mk 1 or Mk2.

I do have a gimp suit on the way :-)
Could do with some lube to make delivery of the mk1 easier :-)

The Gimp suit and nipples was despatched today in a plain brown box marked "The 18" Anal Intruder butt plug company" as requested Lloydie!!!!

Today I put on my new ZX master cylinder (Cheers jonacol). Took the forks off and put in new bushes, new seals + 15W oil.

New wheel bearings and had the wheel balanced.

I've got some taper bearings on the way for the head but hopefully I won't have to use it.

I had to remove a bit of material around the caliper mount for my new calipers so I painted the forks whilst they were apart and they look lovely even if I do say so myself.

So just waiting for the paint to cure a bit then I can put the new calipers on. .

Image here, hopefully you can see it.

Kev L wrote:The Gimp suit and nipples was despatched today in a plain brown box marked "The 18" Anal Intruder butt plug company" as requested Lloydie!!!!

great thank you but no lube :-( lol

Xenocide wrote:Today I put on my new ZX master cylinder (Cheers jonacol). Took the forks off and put in new bushes, new seals + 15W oil.

New wheel bearings and had the wheel balanced.

I've got some taper bearings on the way for the head but hopefully I won't have to use it.

I had to remove a bit of material around the caliper mount for my new calipers so I painted the forks whilst they were apart and they look lovely even if I do say so myself.

So just waiting for the paint to cure a bit then I can put the new calipers on. .

Image here, hopefully you can see it.

what paint did you use ?? im going to do mine over winter + fork overhaul

Diabolus wrote:

Xenocide wrote:Today I put on my new ZX master cylinder (Cheers jonacol). Took the forks off and put in new bushes, new seals + 15W oil.

New wheel bearings and had the wheel balanced.

I've got some taper bearings on the way for the head but hopefully I won't have to use it.

I had to remove a bit of material around the caliper mount for my new calipers so I painted the forks whilst they were apart and they look lovely even if I do say so myself.

So just waiting for the paint to cure a bit then I can put the new calipers on. .

Image here, hopefully you can see it.

what paint did you use ?? im going to do mine over winter + fork overhaul

Some of this stuff (from my local bike shop - support local business ;)).

http://www.ebay.co.uk/itm/Simoniz-Tough ... 0823997566

20min drying time between coats. Going to leave it a good few hours to "cure" now though . It's suppsoed to be chip resistant. I use it on my land rover alot and is excellent

Lloydie you just need a mask to go with it and you will have the full kit.

Xenocide you have done a good job there. Looking good. You just need a bit of Red now for the faring lower. Those old lightwights are great fun. Is it the 2 1/4 petrol with tanks under the front seats.

(:-})

Just ordered one :-)

only the ball gag to go then mate!!! Let's be honest the mask can only improvement.

Kev L wrote:only the ball gag to go then mate!!! Let's be honest the mask can only improvement.

Bugger all other than a clean, was going to do mixture work but just cleaned it and had a huff when i couldnt get some sctraches out of the rear end, wombles knows how they got there.

think im going to get a discrete camera next month and stick it in the garage to watch over them