what have you done to your "bike" today

[VTRDark]

Got covered in P38 dust today, been filling and prepping bodywork on my old fazer ready for spraying. Ordered some quality wax polish. Recommendation via ChriC http://www.bilthamber.com/wax-and-polishes/finis-wax And I had some stick coils delivered.

(:-})

[alternative_vtr]

Oil and filter change with Castrol power 4t
That's just tyres I have to change now (been on the bike 12 years so don't trust them) I think I am going for a pair of Michelin Pilot road 3's.
Once the tyres are changed I can put in some rides and enjoy my new Storm

[tony.mon]

I think I have different diameter vac pipes fitted so I will change them to the same before the sync .

Doesn't make any difference.
It's the vacuum itself that's measure, not the volume of air or the air flow through the pipe.
Length is irrelevant, too.

[tony.mon]

I think I have different diameter vac pipes fitted so I will change them to the same before the sync .

Doesn't make any difference.
It's the vacuum itself that's measured, not the volume of air or the air flow through the pipe.
Length is irrelevant, too.

[grumpyfrog]

lloydiecbr wrote:
Length is irrelevant, too.

Can you tell that to the Ex please--

[tony.mon]

lloydiecbr wrote:
Length is irrelevant, too.

Can you tell that to the Ex please--

Certainly, I'll mention it to her next time you're out for a long ride on the bike.

[lloydie]

Thanks tony but I change it today and synced them again .
Rides better now but I now need to play with the mixture as its a little lean at the bottom .
Dyno Saturday :-) :-)
Let's hope for an improvement .
Last time 108bhp .
I hope to get into the 110s by the end of the day :-)

[Ckennedy]

Ordered these last week but had to wait for the spacers to turn up, also had to get higher wattage bulbs than were fitted but spent 30mins fitting them eariler. I think there the dog knackers!
https://profile.live.com/cid-07e5c145fc ... &sc=photos

Yes OK she needs a wash, but that will happen

Safe riding
Ckennedy

[lloydie]

link not working

[Ckennedy]

How about this:
https://profile.live.com/cid-07e5c145fc ... &sc=photos
Have to log into windows messenger though...
If anyone can repost the pics properly it would be nice, I can not get my head around it

Safe riding
Ckennedy

[seb421]

How about this:
https://profile.live.com/cid-07e5c145fc ... &sc=photos
Have to log into windows messenger though...
If anyone can repost the pics properly it would be nice, I can not get my head around it

Safe riding
Ckennedy

Use this, easy, free, forum friendly.

http://photobucket.com/

[Ckennedy]

OK got that sorted. Hope this works....
http://s497.photobucket.com/albums/rr336/c-kennedy/

[lloydie]

OK got that sorted. Hope this works....
http://s497.photobucket.com/albums/rr336/c-kennedy/

use this link

[Ckennedy]

Got cha . I shall try to remember that.

Safe riding
Ckennedy

[agentpineapple]

done lots of bits to the bike today, read about it in the pimp section, theres good and bad...