VTR1000.ORG

I'm currently adding a sawn-off CBR brace to my swing-arm, but was thinking about fitting it underneath the arm.
That way I can still use my carbon hugger/chainguard.

The only problem is that I have to thread the chain through the arm while it's being welded, to save breaking and re-connecting the chain.


It will cut down on clearance underneath the bike, but not too much.....any comments or ideas?

I think it's possible, but not so easy....

Under the swingarm you have each the linkage system...

and another problem was the ground clearence...

Some new pics...

The quickshifter...



A screenshot of my Ignitech tunable ignition unit... i can work in the ignition timing advance, set the rev-limiter, cut the ignition during the use of quickshifter, set a flash-light for the rev limiter, and work in many other parameters...



And a pics of my bike at today....

Rama53 wrote:Hi Cliveyandrews! I think it's a good mod, and it's easy to do... you have only to cut the part and weld on the original swingarm... it fit very good, have the same measure...

Oh, in your signity i've look a ZX-7R... I have the same bike!!! It's great... it's my first bike and I love it...
This is a pic of mine...

That's a nice looking 7R - alas mine came to an untimely end (and very nearly me too)






Are you on the Redmonkey 7R Forum http://www.redmonkey.com/7r/

Very Nice work flavio , i wish i was that skilled ! .

i was bored and thought i'd have a look thru this section, omg your bike is stunning, very very nice, it makes my attempts at tinkering with my bike look like a ham fisted child........
i don't know if your still active on the forum, but i'd like to see some more recent pictures......

Hows this bike coming?

wot he sed.

very interesting.

i had never seen this project until today!

impressed!! respect!!

wish i had a bit of your skill

seb421 wrote:wombles ME THAT IS BIKE PORN! PHWARRRRRRRRRRRRRR

Has any one got the pictures of this bike saved as they are no longer here most of them

Just reading through this I'm a bit disappointed all the pics are gone. Have you had a look over on the superhawk site for it Seb. I would like to see the pics of the airbox.

(:-})

He did run the build on the Superhawk forum and on an Italian VTR site, with more pictures, but all in Italian.

Kev L wrote:He did run the build on the Superhawk forum and on an Italian VTR site, with more pictures, but all in Italian.

I've linked to both on bsm project Page but on those the same pictures have gone, double drat!

Sent from the Bat Cave via Cup and String

Rama53 come back, where are you.


CAN YOU HEAR ME


(:-})

cybercarl wrote:Rama53 come back, where are you.


CAN YOU HEAR ME


(:-})

AMEN to that buddy