VTR1000.ORG

yes its the fail safe for my video camera think i need to work on a better design

Is it a tampon on the string??

and the driveway looks filthy, though the green paint on the gate looks clean....

fitted hids so ive now got 2 x low beam 2x hi beam
theyre awesome lol - cant wait to road test them proper!

fitted a 40a relay for accessories & grips, new charger, new battery

difference.... tilt the screen a bit if youre on a lappy and you'll get the idea (this was with flash on btw)

That's a fair bit brighter, you might be able to spot aircraft with

That's bright . I do miss my hids

Wicky wrote:Is it a tampon on the string??

and the driveway looks filthy, though the green paint on the gate looks clean....

always same its just a pad at rear off house and when it rains it just looks as bad

sunday-gave it a good glaze and seal

What glaze did you top it up with.

fitted hids so ive now got 2 x low beam 2x hi beam

That looks so bright. The only thing I don't like about it is the way twin headlights only have high beam on one side. I never have quite understood why it has to be that way. I have the same issue with the Fazer.

(:-})

cybercarl wrote: The only thing I don't like about it is the way twin headlights only have high beam on one side. I never have quite understood why it has to be that way. I have the same issue with the Fazer.

(:-})

thats why ive converted it to h4. just get a h4 hid set meant for a car. and theyre cheaper than bike kits.
mine was only £16 including the bulbs lol!

standard sp has h7 single beams with low beam on the left and high beam on the right.
on high beam both lamps are lit.

with the h4 conversion ive now got 2 low beams and 2 high beams - like this
(low beam) yes i know i need to adjust the beam!


before on low there would just be the one lamp lit, so now theres twice the light, as well as it being brighter

this is the standard h4 holder - like the bulb base in the firestorm


after 5 minutes with the dremel you get this




this is a removable metal part btw - no need to grind away at the actual bulb... when its modded it just clicks onto the bulb and bobs yer dad. you now have low beam on both sides

only other thing to do is make up a lead with 6.3mm spade connector to pick up the high beam live from the right hand side, as the h4 plug will have 3 wires - one low beam, one common, one high.
all becomes obvious when you have the hid harness in front of you

beauty of this is if i decide to change it back its just a matter of unplugging the hid plug from the 2 original h7 sockets and refit the original bulbs.
no mods to the original wiring loom or headlamps.
thought it better to do it like that in case i ever toast a ballast in the middle of nowhere and can only get a standard bulb from a garage

beauty of this is if i decide to change it back its just a matter of unplugging the hid plug from the 2 original h7 sockets and refit the original bulbs.
no mods to the original wiring loom or headlamps.

Good for MOT time too. Thanks for the explanation. Very impressive Better lighting is something I need to do on the Storm at some stage and seeing as HID's are OK for bikes I may go down that route.

(:-})

i did f-all on the bike today, i did get a package in the post yesterday tho, a cheapy bike cover, it was nine quid, and believe me its crap, just remember you get what you pay for

benny hedges wrote: after 5 minutes with the dremel you get this

Impaired vision?

I love the single HID on mine - never had MOT issues. I have a "cunning plan" that involves fitting two dipping projector units into a standard headlight bowl. (Dipping units drop the mask to get full beam). I might even fit 2 55w HID lamps rather than 35's (I have 55's for the Jag too). I will mod the dip masks, so the left hand unit will aim slightly left and use the standard cut off. The right hand will have no cut off and aim straight up the road. I just need £200 for the parts....


Sent from my iPhone using Tapatalk and my fat thumbs...

I had one on an old bike of mine and it was sh1t. Good light output but kept jamming on high beam. I wasn't very popular.

Repaired the body work last night and
Dropped it all of at the paint shop this morning :-)
Should get it all back early next week :-)
In the new colours !

lloydiecbr wrote:Repaired the body work last night and
Dropped it all of at the paint shop this morning :-)
Should get it all back early next week :-)
In the new colours !

Whoooooooooooo. Look forward to seeing it in it's new skin