VTR1000.ORG

Oops, not clutch, carbs!! He broke some plastic bit that goes into the carbs.

Thanks carl!

Seb, you got a link to them? I've been chatting with a bloke named Doug at Yoshimura-rd.com and he's been out measuring up different Nameplates to see which will fit, and the only one that lines up is the Titanium one:



Waiting on his pricing, but I stupidly mentioned after all this "Im not sure if these are Titanium, I bought them off eBay" - Since then he hasnt replied. But maybe he's off and Im just being paranoid

Loydie, I was planning on ordering repacking wool when/if I ordered the plates from Yoshi.

Cheers Martie

EDIT, Seen the links, cheers Seb. Hopefully the guy at Yoshi will hook m up with his, as they look perfect.

yeh hopefully you can get some proper ones off Yoshimura but i wouldn't put Titanium Badged ones on them as it would look daft on a shiny ally can

Not being fully aware of the difference in appearance between the two metals. I was hoping it wouldnt be noticeable :/

Eclectic wrote:Oops, not clutch, carbs!! He broke some plastic bit that goes into the carbs.

What you need is these brass versions made by gl_s_r - as the placcy bit that broke don't come individually or with the choke cable.

lloydie wrote:Did you repack them ?
As they will need doing by now

Go here fantastic service...

http://www.vtr1000.org/phpBB3/viewtopic ... 21#p259385

A titanium sticker on ali cans?
It'll be as noticeable as carbon plastic sheet stuck on heavy plastic or metal bits.....

Today I repaired my home-made stacks, SP1 tops grafted onto Storm short ones.
I lashed them together with a splash of plastic guttering adhesive, which only lasted a few months before the occasional fuel spray backing up through the carbs has weakened.

So lots of Araldite today, and a six monthly checkup- I have the airbox off pretty often anyway- and fitted Keihin 190's mains in both carbs.

It's fuelling ok, but the plugs (Brisk) are showing it's ok but a little advanced, so i'd rather run a bit rich to avoid detonation, even though it'll use a bit more Super unleaded.....
Whatever, if you count the cost of fuel you'll sell it and buy a Hon 90 Supercub.

Eclectic wrote:Not being fully aware of the difference in appearance between the two metals. I was hoping it wouldnt be noticeable :/

this is an old RS3 Titanium one



http://www.ebay.co.uk/itm/Yoshimura-RS- ... 460f25c326

also if you fancy ago at repacking them yourself this might be handy

[youtube][/youtube]

http://www.vtr1000.org/phpBB3/viewtopic ... ra#p252638

seb421 wrote:

Eclectic wrote:Not being fully aware of the difference in appearance between the two metals. I was hoping it wouldnt be noticeable :/

this is an old RS3 Titanium one

kinda ironic that one has the stainless badge

playerone wrote:

seb421 wrote:

Eclectic wrote:Not being fully aware of the difference in appearance between the two metals. I was hoping it wouldnt be noticeable :/

this is an old RS3 Titanium one

kinda ironic that one has the stainless badge

IRON-ic?

playerone wrote:

seb421 wrote:

Eclectic wrote:Not being fully aware of the difference in appearance between the two metals. I was hoping it wouldnt be noticeable :/

this is an old RS3 Titanium one

kinda ironic that one has the stainless badge

lol so it is, looked like Ti sleve hence the posting, was just to give him an idea of the matt look of Titanium

anyway here is some other ones

Wicky wrote:

Eclectic wrote:Oops, not clutch, carbs!! He broke some plastic bit that goes into the carbs.

What you need is these brass versions made by gl_s_r - as the placcy bit that broke don't come individually or with the choke cable.

Oh dear. Well I dont know what he has replaced it with! Ill be sure to ask. Thanks!

Cheers for those Seb.

me and carl went for a little ride down into surrey this morning, i needed to pick up this little lot....
http://www.ebay.co.uk/itm/Honda-Firesto ... true&rt=nc
we agreed on £40, i thought that was a bargain, as 2 mirrors are £30
it was a nice little ride and the weather held up, it was bloody windy tho.

bigspanishmarty wrote:me and carl went for a little ride down into surrey this morning, i needed to pick up this little lot....
http://www.ebay.co.uk/itm/Honda-Firesto ... true&rt=nc
we agreed on £40, i thought that was a bargain, as 2 mirrors are £30
it was a nice little ride and the weather held up, it was bloody windy tho.

You always did have wind trouble Mart !

Fitted new standard air filter and refitted the tank .
Just waiting on headers to come so I can have a test ride