VTR1000.ORG

Posted: **Sat Jan 26, 2013 10:57 am**

Do like those exhaust, really suit the look of the bike

Posted: **Sat Jan 26, 2013 10:59 am**

Earlier in the project I designed and made my own headlight bracket:

However it needs some adjustments, which takes time

So in the meantime I have purchased some ready made brackets

I can get on with other things to make the bike roadworthy, then make a new bracket later

Not the right look though

Posted: **Sat Jan 26, 2013 12:13 pm**

i think it looks ok mate, but you know what you want, when do think the bike will be road worthy?

Posted: **Sat Jan 26, 2013 12:50 pm**

Thanks Marty

I would hope to complete it before I die

Or by this summer

Posted: **Sat Jan 26, 2013 1:00 pm**

Your just want to beat marty's record

I prefer the Black brackets you've fitted but that's just me. You obviously have an overall look that your envisioning.

(:-})

Posted: **Sat Jan 26, 2013 1:03 pm**

Flatline wrote:Thanks Marty

I would hope to complete it before I die

Or by this summer

tell me about it mate, mines about to run into the 3rd year, although it was running for most of last year....

Posted: **Sat Jan 26, 2013 4:30 pm**

bigspanishmarty wrote:

tell me about it mate, mines about to run into the 3rd year, although it was running for most of last year....

Albeit on one cylinder !

Posted: **Sat Jan 26, 2013 6:08 pm**

MacV2 wrote:
bigspanishmarty wrote:

tell me about it mate, mines about to run into the 3rd year, although it was running for most of last year....
Albeit on one cylinder !

i still hold the record for fastest single cylinder firestorm at brands hatch......

Posted: **Mon Jan 28, 2013 7:35 pm**

Stripped down the front calipers

Spraying the footrest hangers in the paint booth

Cut the frame at the end

Shaped some frame parts to make the "V"

You may remember I bought some indicators to fit in the end of the frame: Voila!

Will check what it looks like with the frame joined to the end rather than as a "V"

Posted: **Mon Jan 28, 2013 7:40 pm**

Loving the paint booth. You just need a couple of hairdryers poking through the sides. Don't worry about extraction as fumes are good

(:-})

Posted: **Mon Jan 28, 2013 8:19 pm**

Posted: **Mon Jan 28, 2013 9:57 pm**

Keep up the good work Flatline

Chris.

Posted: **Mon Jan 28, 2013 10:08 pm**

Maybe I can get it ready for the ride out in May

Posted: **Mon Jan 28, 2013 11:07 pm**

every little helps

Posted: **Tue Mar 05, 2013 6:47 pm**

I need some tubing for the cafe racer project

The frame is 25mm which I am finding it hard to source

Anyone know where I can get a metre of the stuff?

VTR1000.ORG

Ducati 750ss First time project

Re: Ducati 750ss First time project

Update Jan 2013.Headlight

Re: Ducati 750ss First time project

Re: Ducati 750ss First time project

Re: Ducati 750ss First time project

Re: Ducati 750ss First time project

Re: Ducati 750ss First time project

Re: Ducati 750ss First time project

Update Jan 2013.Various

Re: Ducati 750ss First time project

Re: Ducati 750ss First time project

Re: Ducati 750ss First time project

Re: Ducati 750ss First time project

Re: Ducati 750ss First time project

25mm Steel tubing needed for cafe racer project