Page 1 of 7

Here we go again....

Posted: Wed Apr 09, 2014 10:39 pm
by Shauned71
Hey hey... it's that time again. Besides a few upgrades I will be giving me storm a freshen up in a couple weeks time.

Just for a recap...

When I got her last year....

Image


Once I had finished with her....

Image

But... how she looks now :problem:

Image


Think I have finally decided what i'm going to do and all being well it will be something like this....

Already have 19lt tank and nice pair of Armstrong discs
Pyramid belly & Undertray
Will be joining the front and side fairings up to make it a one piece
Elsemade slip stream seat, all black with orange logo,stitch and piping. Although this depends on funds so may be a little while down the line.
Gonna go with black calipers and orange lettering.

Colour change.... I love the orange on my bike... but... since painting my second bike I'm really liking the look of the storm in black.. so...
Plan is to repaint the bike with a straight black tinter, then add orange (my old colour) number boards on the front and sides like the lovely 'Kermit' although with out the pin strip around them.
Will have a small section of the belly painted orange and to top it off orange wheels.
Before the lacquer goes on I will coat the lot with the second basecoat that I used originally when I painted the bike orange so I should have a very light, subtle pearly gold metallic tint throughout.
No idea what i'm going to do decal wise and the only bit i'm left to make my mind up on....
Planning on re-sleeving my cans with carbon tubes to loose a bit of the chrome then will either polish the swing arm up along with the rest of the frame... or the other idea I have had, polish the rest of the frame but do the swing arm in satin black and the hugger in orange... decisions decisions :crazy:

Will update you in due course :wink:

Re: Here we go again....

Posted: Wed Apr 09, 2014 11:32 pm
by lloydie
looks like a good project and a good base to build upon . im liking the colour choice :thumbup: .
ill keep my eye on this one :thumbup:

Re: Here we go again....

Posted: Thu Apr 10, 2014 1:54 am
by VTRDark
All those colours are a pigment of your imagination.

(:-})

Re: Here we go again....

Posted: Thu Apr 10, 2014 6:30 am
by lanny
Interesting as I am looking at ideas to add to my orange storm colour wise, I looked at matte black but decided it would end up a little KTM'ish. Struggling to decide at the mo but feel it needs to be light rather than a dark colour :thumbup:

Re: Here we go again....

Posted: Thu Apr 10, 2014 9:25 am
by Shauned71
lanny wrote:Interesting as I am looking at ideas to add to my orange storm colour wise, I looked at matte black but decided it would end up a little KTM'ish. Struggling to decide at the mo but feel it needs to be light rather than a dark colour :thumbup:
I did think about keeping mine orange then adding lighter parts.. I liked the white wheels with the orange so was tempted to do the rear seat frame white (atleast what showed of it) and add white number boards but my wheels are a very bright white so would of toned all the white bits down a tad so not quite so much of a contrast. But... got the idea of going black into my head now so looks like that will be it... ofc there is always time to change my mind... the day i bought the orange colour to paint the bike the first time I had gone to my suppliers with the intention of buying a lovely deep pearl blue.. bike was going to be blue with white wheels but at the last moment changed my mind lol

Re: Here we go again....

Posted: Thu Apr 10, 2014 11:10 am
by sirch345
IMHO I like the work you have done so far, the orange paint work looks good in the photo's with the white wheels. Obviously choice is a personal thing, so you have to do what you like.

I think orange and black work very well together, so I'll be watching this space :thumbup:

Chris.

Re: Here we go again....

Posted: Thu Apr 10, 2014 11:45 am
by AMCQ46
hey Shaun, welcome back.

good to see you got the bins in in the 2nd photo.............looks like you lost a bit of weight too :lol:

I like the Black / yellow combo in the 3rd photo.

Looking forwards to see what colour it ends up by the time we are all meeting up in Wales again

Re: Here we go again....

Posted: Thu Apr 10, 2014 11:53 am
by Kev L
"I like the Black / yellow combo in the 3rd photo."
That explsins why you ride a yellow bike, you're colour blind!?!!! :lol:

Re: Here we go again....

Posted: Thu Apr 10, 2014 1:39 pm
by AMCQ46
Kev L wrote:"I like the Black / yellow combo in the 3rd photo."
That explsins why you ride a yellow bike, you're colour blind!?!!! :lol:
how dare you :Ball Kick: ............ we all know that Blue paint was only introduced to give the rest of us a laugh

Re: Here we go again....

Posted: Thu Apr 10, 2014 11:06 pm
by Shauned71
Bike is only black and yellow at night in my garage.. when i take it out in the daylight it turns orange and goes faster :P

Hoping the black/orange works out... just got to decide on a few touches and if to put a thin border around the number boards.. can't think of a colour that will go. Time is going to be the essence here though... want to do the job the first 2 weeks of may so I can then give her a quick service and run for MOT ready for IOM later that month... my problem is... money I need for my bike is tied up in the project below... sticking this one back together as fast as poss so, got it running tonight courteous of a mate letting me pinch his r/r for 10 mins and all being well will have it all back together for the weekend. Couple weeks of work to make money and then if the black bike sells I can make a start on mine :-)

If that don't work out then my bike goes to the TT's as is and i'll do her when i'm back.

Image

Re: Here we go again....

Posted: Thu Apr 10, 2014 11:13 pm
by lloydie
how about a purple pin stripe around the number boards or green

Re: Here we go again....

Posted: Fri Apr 11, 2014 11:23 am
by Shauned71
AMCQ46 wrote:
Looking forwards to see what colour it ends up by the time we are all meeting up in Wales again
Looking forward to the Wales meet.. will try later in year to get too some of you guys as well.... sucks being stuck down here when it comes to the bike scene.. although we have nice places to ride there isn't really a great deal going on and little in way of clubs. If we lived closer some of you guys would see me and my storm mates from around here a lot more, when not busy with work any excuse to get out on the bike and were out! :)

Re: Here we go again....

Posted: Sat May 03, 2014 10:54 pm
by Shauned71
Really getting the bug to get stuck into my bike now but because of work I can't make a start on it until the 13th or just after.. bike must be finished by the 28th to allow for a last minute MOT, quick test ride and then it's load up and off on the 30th to IOM. No pressure :lol:

Think I got lucky.. well i feel lucky atleast.. Just bought a pyramid belly pan with brackets, spotted it on fleabay.. it had only been on there 20 mins or so when I spotted it. Maybe it's one of you guys selling it ? Damaged pan, bit snapped off the one end at rear. Easy enough repair.. plus BONUS!!! the saving of £££'s I made instead of buying new will pay for a new set of carbon sleeves for my scorpions, so happy :D
Undertray ordered and will pick up paint next week ready.

Wish i had alternative transport so i could just get on with things.

Re: Here we go again....

Posted: Sun May 04, 2014 6:24 am
by lloydie
Sounds like your going to have a few busy days :thumbup:

Re: Here we go again....

Posted: Thu May 15, 2014 11:18 pm
by Shauned71
Have found myself completely lacking motivation lately.. and after 2 days of staring at my bike trying to make my mind up on a few niggling details I finally made a start.
Went out early afternoon and picked paint colours etc did my running around out of the way as the bike is my only transport so i'm currently on foot if i want to go anywhere.

So far bike gone from this..... Parked up outside paint shop at about 2.30pm today

Image

To this... a few hours later

Image

Image

Now I have no choice but to get my finger out and crack on :-p

Starting to worry if bike will be ready for end of month and trip to IOM... Hoping paint work will be done for early next week, it probably won't be quite that quick but if it is or near that then I will feel a lot more confident about having everything completed on time.