As per title, would anyone possibly have the codes for the bearings of the:
Head stock (would like to put tapers in...)
Front wheel
Rear wheel and sprocket carrier
Would like to source some at a decent price prior to stripping the bike down as it's in daily use.
As always, any help appreciated.
Anyone have bearing codes for...?
Anyone have bearing codes for...?
I'm not death to power tools... If it breaks, it's obviously NOT a power tool!!!
Re: Anyone have bearing codes for...?
Here's the page for bearing numbers: http://www.ronayers.com/CBR600SE-C24593.aspx
Here's some decent taper head bearings: http://pages.ebay.com/link/?nav=item.vi ... 03&alt=web another good maker of taper bearings are "all ballz" but I can only see Usa sellers at the mo.
Here's some decent taper head bearings: http://pages.ebay.com/link/?nav=item.vi ... 03&alt=web another good maker of taper bearings are "all ballz" but I can only see Usa sellers at the mo.
Jamie
-
- Posts: 621
- Joined: Sun Apr 07, 2013 12:02 am
- Location: Newport South Wales
Re: Anyone have bearing codes for...?
Wemoto sell allballs, I have changes all mine and they are great.
Budget storm gradually on the road to spangliness.
Re: Anyone have bearing codes for...?
Thanks all.
I've put all balls fork seals in recently and will agree with the above that they appear to be of good quality...
I've put all balls fork seals in recently and will agree with the above that they appear to be of good quality...
I'm not death to power tools... If it breaks, it's obviously NOT a power tool!!!
Re: Anyone have bearing codes for...?
Didn't think to look before due to the often inflated prices these days but my local (M&P's) sells all balls at a reasonable price....
Link:
http://www.mandp.co.uk/productsList.asp ... e=235-2000
Plus I know two of the lads there so they may be able to offer a couple of pennies discount - happy days!!
Link:
http://www.mandp.co.uk/productsList.asp ... e=235-2000
Plus I know two of the lads there so they may be able to offer a couple of pennies discount - happy days!!
I'm not death to power tools... If it breaks, it's obviously NOT a power tool!!!
Re: Anyone have bearing codes for...?
I got my tapers as a kit from MandP , they have been in a long time and never given any trouble
Max