VTR1000.ORG

Quick question to the aficionado's on the board.

I've still not been close enough to a Firestorm to check, but from photo's I've seen it looks like a simple job of flipping over the shift arm on the end of the selector shaft to achieve 'race shift' of 1 up 5 down.

Is this the case or will it need a bit more modification? It looks like the clutch slave cyl' might be in the way, if indeed it is the clutch slave?

Thanks in advance.

Ross.

Should work, you might need a slightly longer rod is all
However, chances are you'll be fitting rearsets anyway so it will be easier if that's the case.

Or what i done when i ran a race shift on my 7r, i put a stubby motox gear leaver on backwards ,