Page 1 of 1
Shock protector/ mudguard
Posted: Fri Jul 21, 2017 3:02 pm
by Steve6088
Does anybody know where I can get the shield/mudguard which protects the shock? I can see any on ebay. I might just be giving it the wrong name though.
cheers!
Re: Shock protector/ mudguard
Posted: Fri Jul 21, 2017 3:11 pm
by VTR3545
Ever considered getting a rear hugger instead
Re: Shock protector/ mudguard
Posted: Fri Jul 21, 2017 3:17 pm
by Steve6088
I've always had both. Still get crap on the shock with just a hugger
Re: Shock protector/ mudguard
Posted: Fri Jul 21, 2017 3:50 pm
by MacV2
Steve6088 wrote:I've always had both. Still get crap on the shock with just a hugger
Shock Sock...?
No I just looked it up R&G Shocktube...
Can only find one for the SP...
http://www.ebay.co.uk/itm/R-G-SHOCKTUBE ... LYxnr1r6JQ
Re: Shock protector/ mudguard
Posted: Wed Jul 26, 2017 12:24 pm
by Steve6088
I actually mean this flap thingy.
Re: Shock protector/ mudguard
Posted: Wed Jul 26, 2017 1:04 pm
by MacV2
Steve6088 wrote:
I actually mean this flap thingy.
Flap Thingy...
Ohh Matron...
Officially Honda refer to it as a SPLASH GUARD..tho I do prefer flap thingy...
https://www.cmsnl.com/products/mud-guar ... 115mbb010/
Although you need the metal straps & the nuts & bolts as well to fit it...No's. 8,9, +3x of 10,23 & 24...
Which by the time you have forked out for that lot + the VAT & postage...It'll be cheaper to buy a shocksock...
Having said that I might have a spare one in the MacCave...I did find one the other day as I want to use it...Maybe there is another one.
I take them off if there is a hugger as they hit the hugger when both are fitted...
Re: Shock protector/ mudguard
Posted: Wed Jul 26, 2017 1:13 pm
by KermitLeFrog
Cut the shape out of an empty 4l oil container, drill 3 holes and pop rivet to the plastic bracket. That's what I did.
I removed it by drilling out the pop rivets to fit a shitty hugger which died. Hugger off, three more pop rivets and it's back in place. Works a treat.
ps. Used small SS washers behind the plastic bracket so the rivets pulled up on those instead of the plastic.
Re: Shock protector/ mudguard
Posted: Wed Jul 26, 2017 11:11 pm
by fabiostar
KermitLeFrog wrote:Cut the shape out of an empty 4l oil container, drill 3 holes and pop rivet to the plastic bracket. That's what I did.
I removed it by drilling out the pop rivets to fit a shitty hugger which died. Hugger off, three more pop rivets and it's back in place. Works a treat.
ps. Used small SS washers behind the plastic bracket so the rivets pulled up on those instead of the plastic.
i love your thinking
Re: Shock protector/ mudguard
Posted: Thu Jul 27, 2017 9:31 am
by Watty
fabiostar wrote:KermitLeFrog wrote:Cut the shape out of an empty 4l oil container, drill 3 holes and pop rivet to the plastic bracket. That's what I did.
I removed it by drilling out the pop rivets to fit a shitty hugger which died. Hugger off, three more pop rivets and it's back in place. Works a treat.
ps. Used small SS washers behind the plastic bracket so the rivets pulled up on those instead of the plastic.
i love your thinking
Farmer stylee