Page 1 of 1
New here and to the VTR
Posted: Sat Oct 23, 2021 9:30 pm
by ___Norwegian___
Hi
I just bought my VTR -99 black with 62000km.
As you can see, im from Norway
I have other bikes to, mx also.
This is mny bike nr 24.
Re: New here and to the VTR
Posted: Sun Oct 24, 2021 10:29 am
by mjvw
Warm Welcome enjoy.
Re: New here and to the VTR
Posted: Sun Oct 24, 2021 10:43 am
by alanfjones1411
Hello and welcome to the forum
Re: New here and to the VTR
Posted: Sun Oct 24, 2021 12:11 pm
by Kev L
Welcome to the club, hope you enjoy the Storm
Re: New here and to the VTR
Posted: Sun Oct 24, 2021 4:40 pm
by AMCQ46
hello & welcome
Re: New here and to the VTR
Posted: Sun Oct 24, 2021 7:48 pm
by fabiostar
welcome along
Re: New here and to the VTR
Posted: Sun Oct 24, 2021 8:00 pm
by sirch345
Hi, and welcome aboard
Chris.
Re: New here and to the VTR
Posted: Mon Oct 25, 2021 2:24 pm
by gilson
Welcome to the forum.
Re: New here and to the VTR
Posted: Wed Oct 27, 2021 8:40 am
by Håkan in Sweden
Hello
My name is Håkan and I recently bought a Honda Vtr 1000 -03
Will probably ask many questions about Vtr in the future.
Håkan in Sweden
Re: New here and to the VTR
Posted: Wed Oct 27, 2021 10:12 pm
by Kev L
Welcome to the club Håkan, enjoy the bike and ask away
Re: New here and to the VTR
Posted: Wed Nov 03, 2021 4:20 pm
by ___Norwegian___
Håkan in Sweden wrote: ↑Wed Oct 27, 2021 8:40 am
Hello
My name is Håkan and I recently bought a Honda Vtr 1000 -03
Will probably ask many questions about Vtr in the future.
Håkan in Sweden
Re: New here and to the VTR
Posted: Wed Nov 03, 2021 4:24 pm
by ___Norwegian___
Thanks to everyone
Just now iv been measuring valveclearance. Some where on the tight side (total 62000km), but i leave em for some 1000km.
Iv also gona swap the A-CCT's for these ones:
https://www.camchaintensioner.co.uk/
I also have a MT10SP and a K1300S HP.
I like to wrench my bikes by my self.
Re: New here and to the VTR
Posted: Wed Nov 03, 2021 9:05 pm
by sirch345
___Norwegian___ wrote: ↑Wed Nov 03, 2021 4:24 pm
Thanks to everyone
Just now iv been measuring valve clearance. Some where on the tight side (total 62000km), but i leave em for some 1000km.
Iv also gona swap the A-CCT's for these ones:
https://www.camchaintensioner.co.uk/
I also have a MT10SP and a K1300S HP.
I like to wrench my bikes by my self.
Nice choice
Chris.