Hello, I just received an old VTR 1000 Firestorm and now the tachometer is faulty and not working.
I did a preliminary check and found R1 on the circuit board had blown. I would like to ask from your experience if you know the cause of the problem and can you recommend me a reputable repair address? Thank.
Problem with old VTR 1000
Re: Problem with old VTR 1000
I haven't come across a repairer for these but you should be able to find a secondhand set easily enough.
If you can read the resistor, you can simply solder one on as a bridge for the blown one. Of course, if the fault still exists, you might blow the replacement, too.
If you can read the resistor, you can simply solder one on as a bridge for the blown one. Of course, if the fault still exists, you might blow the replacement, too.
It's not falling off, it's an upgrade opportunity.
Re: Problem with old VTR 1000
I have some used clock sets... Various miles on them so either complete swap or use for parts.
Making up since 2007, sometimes it's true...Honest...