Search found 107 matches
- Thu Nov 09, 2023 6:18 pm
- Forum: Workshop
- Topic: unstable seat
- Replies: 4
- Views: 2396
Re: unstable seat
thank youbvery helpfull Mac
- Thu Nov 09, 2023 8:33 am
- Forum: Workshop
- Topic: unstable seat
- Replies: 4
- Views: 2396
unstable seat
Hi guys, I just realized that the seat on my vtr is very wobbly, there is a lot of play fore and aft...yours too? it's normal?
It seems strange but underneath everything is fine.
It seems strange but underneath everything is fine.
- Sat Sep 09, 2023 8:17 pm
- Forum: Workshop
- Topic: new rear brake pads too thick
- Replies: 4
- Views: 2230
Re: new rear brake pads too thick
thank you Chris
- Sat Sep 09, 2023 6:53 pm
- Forum: Workshop
- Topic: new rear brake pads too thick
- Replies: 4
- Views: 2230
Re: new rear brake pads too thick
yes the wheel turn freely after replace the pads with everything cold my suspect is that after some hard breaking the disc get so hotter to expand and get closer too much to them
- Sat Sep 09, 2023 1:25 pm
- Forum: Workshop
- Topic: new rear brake pads too thick
- Replies: 4
- Views: 2230
new rear brake pads too thick
Hi guys I just change the rear pads with a new pair of nissin oem and the clearance between them and the rotor is very very little...as I went this morning for quick ride the rear rotor became extremely hot, than with the expansion of the metal the wheel don't turn very freely...is this normal? the ...
- Thu Aug 17, 2023 2:26 pm
- Forum: Workshop
- Topic: Problem with starting engine
- Replies: 7
- Views: 2657
Re: Problem with starting engine
the problem isn't in the starting engine, the problem is in the starting clutch that is worn
- Thu Aug 17, 2023 1:12 pm
- Forum: Workshop
- Topic: Problem with starting engine
- Replies: 7
- Views: 2657
Re: Problem with starting engine
the issue is the starter clutch beyond the freewheel
- Sat Apr 22, 2023 5:50 am
- Forum: Workshop
- Topic: Vtr1000f firestorm cam tensioner - chain tension
- Replies: 3
- Views: 432
Re: Vtr1000f firestorm cam tensioner - chain tension
the misfiring Is not related to the chain tension 5 mm Is ok,...are you sure to have not skip a teeth with the timing? are you sure to have reinstall the carbs choke cable and nuts correctly?
- Fri Mar 31, 2023 4:59 am
- Forum: Workshop
- Topic: Tool Kit List
- Replies: 7
- Views: 586
Re: Tool Kit List
I got a complete set for sale
- Sat Mar 11, 2023 7:02 am
- Forum: Workshop
- Topic: Main swing arm pivot bolt help!
- Replies: 8
- Views: 592
Re: Main swing arm pivot bolt help!
if you pull out the long bolt out, everything collapse as you said. Better to put a wood block under the engine before make a disaster
- Thu Mar 02, 2023 7:07 pm
- Forum: Workshop
- Topic: Compression test.
- Replies: 21
- Views: 1764
Re: Compression test.
you cannot do a compressione test by hand..., does the bike start ? if no and the bike has been seated for long time i would suggest a carb cleaning before try everithing.
- Thu Feb 09, 2023 8:57 am
- Forum: Workshop
- Topic: crankcase explosion (solved)
- Replies: 15
- Views: 1164
Re: crankcase explosion (solved)
I think the insulating paint had came off from that portion of the stator due to the age of that, heat or milage of the bike > 50000km and 25 yrs
- Tue Feb 07, 2023 11:06 pm
- Forum: Workshop
- Topic: crankcase explosion (solved)
- Replies: 15
- Views: 1164
Re: crankcase explosion (solved)
now I'm searching the web for what can be done with a faulty stator. if the insulating paint can be renewed or not
- Mon Feb 06, 2023 8:33 pm
- Forum: Workshop
- Topic: crankcase explosion (solved)
- Replies: 15
- Views: 1164
Re: crankcase explosion (solved)
yes Sir, is that
- Mon Feb 06, 2023 7:50 pm
- Forum: Workshop
- Topic: crankcase explosion (solved)
- Replies: 15
- Views: 1164
Re: crankcase explosion (solved)
it's on the american Hawk forum