TRACKDAY VIRGIN...

General Bike chat
Post Reply
User avatar
Mart
Posts: 40
Joined: Fri Sep 19, 2003 8:05 pm
Location: TYNE & WEAR YA BUGGA !!

TRACKDAY VIRGIN...

Post by Mart »

Doing my first trackday at Snetterton this coming Monday and i was wondering if anyone could tell me the best suspension settings and tyre pressures for roughly 15/16 stone rider, i aint gotta clue. Or dya think i shouldn't start messing about with them..??

BTW.. i'll be papping mesell..
8O
User avatar
dodds
Posts: 82
Joined: Mon Feb 09, 2004 9:58 pm
Location: Plymouth, Devon

Post by dodds »

Hi, i've only done a few track days so i'm sure there are people out there to give you better advice than me, but i would say as far as tyres go drop the pressures to 30 front and back ( these were the trackday organisers recommendations) and as for the sus, i used front pre load wound right up and rear pre load on the third setting with the rebound at both ends 1/4 out from fully in. (i'm 6' 4" and 16 stone) i would also recommend changing your foot pegs as they will be scrapping everwhere, if you cant afford rearsets ( i couldnt) get some top blocks ones from motrax, with them fitted the first thing to touch down was the belly pan !!. Hope this was of help and have a great day, i'm hooked now and cant wait to do my next one,:twisted: ,dodds.
User avatar
dodds
Posts: 82
Joined: Mon Feb 09, 2004 9:58 pm
Location: Plymouth, Devon

Post by dodds »

should have said for tyres, that the presure is taken when they are cold and they were used on a warm day !!! let us know how you get on :)
User avatar
Leepy
Posts: 24
Joined: Mon Jul 26, 2004 1:24 pm
Location: Leeds
Contact:

Post by Leepy »

A lot of the decent trackday organisers have a suspension specialist there.. I think it was £15 last time with Focussed Events to have it set up for your weight/riding style :)

Well worth it.. just remember to put your tyre pressures right before you set off home :wink:
User avatar
O-Ring
Posts: 50
Joined: Fri Mar 05, 2004 9:02 am
Location: LATINA (IT)
Contact:

Post by O-Ring »

When I run on track.....use 2,1bar front and 1,9rear..
For the suspension is better a specialist on track
Have a good day..

Bye :P
Post Reply