mod list
- benny hedges
- Posts: 6110
- Joined: Sun Oct 18, 2009 5:09 pm
- Location: Warrington
Re: mod list
nawt really mate, cct & rr are the only needed mods.
next thing you might think about is sorting the handling by adding a spacre under the rear shock, drop the forks a little, maybe fit some stiffer springs upfront, uprate the brakes, better lighting.
depends what you want..... different cans, fairing lowers, db screen etc, is a matter of personal taste tbh.
next thing you might think about is sorting the handling by adding a spacre under the rear shock, drop the forks a little, maybe fit some stiffer springs upfront, uprate the brakes, better lighting.
depends what you want..... different cans, fairing lowers, db screen etc, is a matter of personal taste tbh.
You do not have to say anything. But it may harm your defence if you do not mention when posting something which you later rely on in quote. Anything you do say may be ripped to sh*t.
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: mod list
i have hids ready to fit and a very good set of front callipers and a 16mm frontbrake master cylinder to put on .
shock and forks will wait till next winter.it has race cans fitted .
what about k/n filter and jets ?
db screen no no no .
lowers i might make one
shock and forks will wait till next winter.it has race cans fitted .
what about k/n filter and jets ?
db screen no no no .
lowers i might make one

- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: mod list
oh yes .
i have a set of 6 spokes and two sets of 3 spokes.
what to do !
i have a set of 6 spokes and two sets of 3 spokes.

- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: mod list
i took the air box off today to find a k/n filter then i opened the carbs to find dyno jets
.
the reg/rec is huge and fined but its only putting out 13.5 volts though the hole revs do you think it needs replaced ??




the reg/rec is huge and fined but its only putting out 13.5 volts though the hole revs do you think it needs replaced ??