
http://www.parcels2go.co.uk timbuktu 1 way

benny hedges wrote:got my kit on for a ride & heavens opened.... then stopped then started then stopped then started.![]()
did some maintenance instead, jacked the needles another notch, balanced the carbs, fitted some new plugs, cleaned the air filter, cleaned the chain & tried some different grease, changed vac lines & fuel lines for blingier braided ones....
roads are dry now so i'll go & test it out - see you at eastham Tap later if you're going.
(and if it stays dry!)
4mm id for the vac hoses, 12mm for the fuel lines.alec wrote:
i was going to fit braided hoses under the tank for fuel etc but couldn't find out the pipe diameters Benny, what have you used mate ?