Got my hands on a old kawk kh100 2 stroke
Seems all there but yet to start it and here it run (been standing for a year)
What kinda price would you stick it up for? log also with it
How much is it worth
-
thumperslaw
- Posts: 1209
- Joined: Thu Nov 24, 2011 7:14 pm
- Location: oxford
How much is it worth
98 storm with goodies!
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Re: How much is it worth
Doubt it will go for much, as a runner it might be worth £200 to £300 if it is clean, but the small kwacks aren't collectable so far.
I have 76 kh125 that I restored for a laugh, but I decided to keep it for posterity and I ride it for any local journeys into town. It had been off the road for 13 yrs and only had 7000miles, but took a bit of work to get it running. If it has not been used all the rubber sels will be fecked. Main ones you need to worry about are the crank seals and the ones round the disk valve. The carb jets will be blocked and the sponge backing on the air filter will have disintegrated. Also worth changing the condenser, as mine started to breakdown when hot.
Good thing is all spares are cheap and still available. The biggest expense on mine was new tyres.
This is my old girl
I have 76 kh125 that I restored for a laugh, but I decided to keep it for posterity and I ride it for any local journeys into town. It had been off the road for 13 yrs and only had 7000miles, but took a bit of work to get it running. If it has not been used all the rubber sels will be fecked. Main ones you need to worry about are the crank seals and the ones round the disk valve. The carb jets will be blocked and the sponge backing on the air filter will have disintegrated. Also worth changing the condenser, as mine started to breakdown when hot.
Good thing is all spares are cheap and still available. The biggest expense on mine was new tyres.
This is my old girl
AMcQ
Re: How much is it worth
Hmmm, wire wheels 
Re: How much is it worth
I took a job wheelbuilding for Hagon a few years back, just to learn the black art of wheelbuilding.
More to it than it looks....
like most things in life.
More to it than it looks....
like most things in life.
It's not falling off, it's an upgrade opportunity.
-
thumperslaw
- Posts: 1209
- Joined: Thu Nov 24, 2011 7:14 pm
- Location: oxford
Re: How much is it worth
always fancied wheel building on motorcycle wheels. I can do push bike ones with out even looking nowtony.mon wrote:I took a job wheelbuilding for Hagon a few years back, just to learn the black art of wheelbuilding.
More to it than it looks....
like most things in life.
98 storm with goodies!
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5