Mirrors with integrated indicators

[playerone]

I know a few have them fitted, whats the best way to run the wires from them, I assume u gotta drill a hole through fairing for them to pass through?

[marravtr]

nope just took a nick out one of the bolt holes with a small drill bit instead of making another hole

[playerone]

so u used the fittings that came with the mirrors.......I read somewhere that u get better angle and fitting if u swap the original fittings with the new ones and without trying them thats what I done but can always swap them back

[marravtr]

i used the original storm mirror ends as the ones on the aftermarket mirrors wasnt at the right angle and made the mirrors stick up like a rabbit!!! there's some pics on here of mine

[playerone]

knew I'd read it somewhere, was your post

[tony.mon]

the mirrors stick up like a rabbit!!! there's some pics on here of mine

Yup, so do mine.
I just got used to it after a while, the db screen helps.

I just drilled a small hole underneath the mirror mount which is covered by the boot once in place.

And soldered and heatshrinked (heatshrunk?) the connectors in line rather than side-by-side to make the hole needed smaller.

[TonyW650]

out of interest which are the best integrated mirrors to use?