Lower fairing advice?

Show off your bike, modifications or projects and share them with the world.
Post Reply
User avatar
Griff1977
Posts: 387
Joined: Tue Jul 19, 2011 10:43 am
Location: Caistor, Lincolnshire

Lower fairing advice?

Post by Griff1977 »

Looking ahead to when I've saved up a few more pennies, I'd love to get a lower fairing/large belly pan. Having spent a couple of days admiring the bikes whilst in Wales on Op Storm, I really am envious of that finished look. Now problem is which one........

Could I ask anyone with such a belly pan to post a pic of their bike on here so to give a quick and easy comparison? Also could you say which one it is? I looked at the Skidmarx one earlier and it looked cool but I dunno! Also 'cus I've got the brighter (later) yellow (your all jealous you red & blackuns!) I don't see anyone who does that yellow, for eg the Pyramid plastics one says '97 so the previous yellow. Any thoughts? I know I could spray my self as I did the original belly pan, but nice to be done for you!?

Ta. Griff. :thumbup: :confused :thumbup: :confused
KriegerCCTs,HEL oil lines,+4 advancer,+1/-1 sprockets,6mm spacer,CBR1k Sidestand,'07 R1 R/R,HyperPro springs F&R,Pipe Werx SL Carbons,Oxford sports hot grips,Mori style belly
Immediate plans:Clean it!
Top
User avatar
lloydie
Posts: 20928
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: Lower fairing advice?

Post by lloydie »

when i got my belly pan it was yellow . and slowed down my fast black storm i lost 60bhp :( Image
so i painted it black
Image :beer:
it fits great but the side stand can brake it if your not careful
Top
User avatar
agentpineapple
Posts: 15124
Joined: Sat Mar 26, 2011 9:16 pm

Re: Lower fairing advice?

Post by agentpineapple »

powerbronze lowers....
Image
Image
Image
aithough i do like the skidmarx/moriwaki bellypan aswell, that would look good in black or a similar colour to my metalic grey lowers :thumbup:
HEY YOU GUYS!!!!!!
Top
User avatar
seb421
Posts: 4840
Joined: Fri Mar 06, 2009 1:06 am
Location: Bolton Lancs

Re: Lower fairing advice?

Post by seb421 »

Powerbronze all the way!

Sent from the Millennium Falcon via Carrier Pigeon
ヨシムラ

MOT - 10/04/2015
TAX - 30/11/14
INSURANCE - MCE - Expires 12/04/2015 (Midnight)
ACCIDENT CALL - 0871 2227910
RAC - 0800 1977830 - 03_MCECAB90013033
Top
User avatar
AMCQ46
Posts: 16733
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: Lower fairing advice?

Post by AMCQ46 »

Image

Skidmarx Mori replica
AMcQ
Top
User avatar
agentpineapple
Posts: 15124
Joined: Sat Mar 26, 2011 9:16 pm

Re: Lower fairing advice?

Post by agentpineapple »

come on al, sort out the wavy rear disc to match the fronts......... :wink:
HEY YOU GUYS!!!!!!
Top
User avatar
Griff1977
Posts: 387
Joined: Tue Jul 19, 2011 10:43 am
Location: Caistor, Lincolnshire

Re: Lower fairing advice?

Post by Griff1977 »

I like the power bronze but I'd need a good paint match with it sitting snug with original fairing.

I think the skidmarx is 'easiest' option and I'd get that in black so no colour problems. Al - id be copying you, soz!

Lloydie- I think it was a cry for help as your bike wished it was all yellow after you fitted the belly! Your yellow decals look good!!

Ta all. Any more pics from any body? I remember admiring Tony's - could you post a couple Tony, which one is yours again?

Griff.
KriegerCCTs,HEL oil lines,+4 advancer,+1/-1 sprockets,6mm spacer,CBR1k Sidestand,'07 R1 R/R,HyperPro springs F&R,Pipe Werx SL Carbons,Oxford sports hot grips,Mori style belly
Immediate plans:Clean it!
Top
User avatar
Kev L
Posts: 11286
Joined: Tue Aug 24, 2010 9:57 pm
Location: Hertford, England

Re: Lower fairing advice?

Post by Kev L »

Another Pyramid version -
Image
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
Top
tattoo
Posts: 826
Joined: Sat May 22, 2010 8:19 pm
Location: March,cambridgeshire

Re: Lower fairing advice?

Post by tattoo »

lloydie i have the same lowers as yours and mine cracked because of the sidestand so i stuck some coloured foam from a craft shop(about 1cm thick) to cushion where the stand hits,it's not cracked since...
Top
User avatar
Griff1977
Posts: 387
Joined: Tue Jul 19, 2011 10:43 am
Location: Caistor, Lincolnshire

Re: Lower fairing advice?

Post by Griff1977 »

Paint...... now this I guess is mainly for the superior storm owners, those who own the yellow variety!! My colour (I believe) is the later yellow, Y163P, as apose to the earlier yellow which is Y124P? So, if I got an un painted, say power bronze lower, then can anyone offer best advice on getting it the closest colour to mine - what I mean is is there a best company to buy paint from or are they all the same? Whats the best primer? Grey plastic primer, white? And then should I put a finishing coat on it? Qs QS QS hey, I am rubbish!! I enjoy doing the work but its just the research that I need to get right!!!

Anyway, there you are, I think thats my plan, power bronze lower that I paint myself, hopefully!!

Griff :wink: :wink: :wink: :wink: :wink: :wink:
KriegerCCTs,HEL oil lines,+4 advancer,+1/-1 sprockets,6mm spacer,CBR1k Sidestand,'07 R1 R/R,HyperPro springs F&R,Pipe Werx SL Carbons,Oxford sports hot grips,Mori style belly
Immediate plans:Clean it!
Top
User avatar
Wicky
Posts: 7895
Joined: Sat Feb 11, 2006 2:43 pm
Location: Colchester Essex
Contact:
Contact Wicky

Re: Lower fairing advice?

Post by Wicky »

Difficult to get a precise colour match esp for yellows. If you do go for it then try an automotive trade finishers to get the paint and undercoat from the appropriate colour code. or spray it black....

If its a plastic pan then yes plastic primer - if it's GRP then etch primer - whichever make sure it's well prepared with wet'n'dry.. For final finishing ProXL Ultra Clear lacquer and you might want to consider applying some clear vinyl wrap for protection on the 'nose' of the pan where it gets grit basted by the front wheel.

Image
Image
Griff1977 wrote:Paint...... now this I guess is mainly for the superior storm owners, those who own the yellow variety!! My colour (I believe) is the later yellow, Y163P, as apose to the earlier yellow which is Y124P? So, if I got an un painted, say power bronze lower, then can anyone offer best advice on getting it the closest colour to mine - what I mean is is there a best company to buy paint from or are they all the same? Whats the best primer? Grey plastic primer, white? And then should I put a finishing coat on it? Qs QS QS hey, I am rubbish!! I enjoy doing the work but its just the research that I need to get right!!!

Anyway, there you are, I think thats my plan, power bronze lower that I paint myself, hopefully!!

Griff :wink: :wink: :wink: :wink: :wink: :wink:
It may be that your whole purpose in life is simply to serve as a warning to others.

ImageVTR Firestorm and other bikes t-shirts
Top
User avatar
Griff1977
Posts: 387
Joined: Tue Jul 19, 2011 10:43 am
Location: Caistor, Lincolnshire

Re: Lower fairing advice?

Post by Griff1977 »

Cheers Wicky, which lower is yours - it looks like the Powerbronze but I see some differences? Ta.
KriegerCCTs,HEL oil lines,+4 advancer,+1/-1 sprockets,6mm spacer,CBR1k Sidestand,'07 R1 R/R,HyperPro springs F&R,Pipe Werx SL Carbons,Oxford sports hot grips,Mori style belly
Immediate plans:Clean it!
Top
User avatar
Wicky
Posts: 7895
Joined: Sat Feb 11, 2006 2:43 pm
Location: Colchester Essex
Contact:
Contact Wicky

Re: Lower fairing advice?

Post by Wicky »

Dunno what I've got :confused - Got it from member here Warby de Lancs in plain gel coat white

http://www.vtr1000.org/phpBB3/viewtopic ... 27#p178333

http://www.vtr1000.org/phpBB3/viewtopic ... 32#p125557
It may be that your whole purpose in life is simply to serve as a warning to others.

ImageVTR Firestorm and other bikes t-shirts
Top
User avatar
agentpineapple
Posts: 15124
Joined: Sat Mar 26, 2011 9:16 pm

Re: Lower fairing advice?

Post by agentpineapple »

wicky's aren't powerbronze, if you like that style, a fellow member styler is selling them, brand new and unpainted, i don't know the who makes them tho, the best thing about them is that you can see the oil level when there fitted.....
HEY YOU GUYS!!!!!!
Top
tony.mon
Posts: 16273
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: Lower fairing advice?

Post by tony.mon »

Griff1977 wrote:I like the power bronze but I'd need a good paint match with it sitting snug with original fairing.

I think the skidmarx is 'easiest' option and I'd get that in black so no colour problems. Al - id be copying you, soz!

Lloydie- I think it was a cry for help as your bike wished it was all yellow after you fitted the belly! Your yellow decals look good!!

Ta all. Any more pics from any body? I remember admiring Tony's - could you post a couple Tony, which one is yours again?

Griff.
Mine's same as Lloydie's, but sprayed graphite metallic, and to stop the paint chipping on the front of the nose section behind the front wheel I stuck a freebie Dunlop tank protector on it and sprayed over the top.
It's not falling off, it's an upgrade opportunity.
Top
Post Reply

Return to “Pimp Your Ride”