Could someone do me a favour

Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
Post Reply
StormingHonda
Posts: 1631
Joined: Wed Mar 07, 2012 5:57 pm
Location: Purfleet, Essex

Could someone do me a favour

Post by StormingHonda »

And make a short video of their rev counter ticking over when the bike is warm, I just want to compair it to mine.

I know its a wierd request but i would appriciate it, 30 seconds of it would be great :thumbup:
edds11
Posts: 550
Joined: Sun Feb 19, 2012 12:19 pm
Location: Scunthorpe

Re: Could someone do me a favour

Post by edds11 »

I'm not that kind of bloke and never ask me again.........regarding the rev counter, mine holds dead steady with the rev's.....can't video 'coz I dropped my I-phone down the crapper :thumbdown:
User avatar
benny hedges
Posts: 6110
Joined: Sun Oct 18, 2009 5:09 pm
Location: Warrington

Re: Could someone do me a favour

Post by benny hedges »

if your rev counter is up n down you need to balance the carbs.
after fixing the vacuum leaks, probably from perished vac tubes.
You do not have to say anything. But it may harm your defence if you do not mention when posting something which you later rely on in quote. Anything you do say may be ripped to sh*t.
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Could someone do me a favour

Post by VTRDark »

There's not much point in having someone video their rev counter as they will all be different. At one stage mine was spot on at the set idle speed, now it drops below and back up a bit as my mixture is not set up properly. What's yours doing that's causing you concern?

Blip test:
1. Start by warming the bike up to normal operating temperature.
2. Blip the throttle up several thousand RPM's or up to redline if you so desire.

As it comes back down to idle one of three things will happen and these are the three results:

1. Upon return to idle it hangs. Where ever it hangs in the RPM's it is running lean. Even a slight hang just before returning to idle means it is running lean at idle.(Must return directly to idle without popping,lag, or hanging).
2. Upon return to idle it goes slightly past and below idle then returns back up to idle speed momentarily. This is a rich run condition.
3. It returns directly to idle w/o any lag, hesitation, or going below idle you have a perfect a/f mixture and run condition.

(:-})
==============================Enter the Darkside
StormingHonda
Posts: 1631
Joined: Wed Mar 07, 2012 5:57 pm
Location: Purfleet, Essex

Re: Could someone do me a favour

Post by StormingHonda »

benny hedges wrote:if your rev counter is up n down you need to balance the carbs.
after fixing the vacuum leaks, probably from perished vac tubes.
Carbs have been balanced by shop, they checked all this ( supposedly ).
StormingHonda
Posts: 1631
Joined: Wed Mar 07, 2012 5:57 pm
Location: Purfleet, Essex

Re: Could someone do me a favour

Post by StormingHonda »

cybercarl wrote:There's not much point in having someone video their rev counter as they will all be different. At one stage mine was spot on at the set idle speed, now it drops below and back up a bit as my mixture is not set up properly. What's yours doing that's causing you concern?

Blip test:
1. Start by warming the bike up to normal operating temperature.
2. Blip the throttle up several thousand RPM's or up to redline if you so desire.

As it comes back down to idle one of three things will happen and these are the three results:

1. Upon return to idle it hangs. Where ever it hangs in the RPM's it is running lean. Even a slight hang just before returning to idle means it is running lean at idle.(Must return directly to idle without popping,lag, or hanging).
2. Upon return to idle it goes slightly past and below idle then returns back up to idle speed momentarily. This is a rich run condition.
3. It returns directly to idle w/o any lag, hesitation, or going below idle you have a perfect a/f mixture and run condition.

(:-})
Thanks carl but before the workshop day it was ok, somethings happened then to make it not idle as it should.
User avatar
BigVeeGrin
Posts: 2521
Joined: Wed Feb 17, 2010 1:41 pm
Location: Glasgow

Re: Could someone do me a favour

Post by BigVeeGrin »

strange one this - maybe it's what happens when a Teal one tries to ape the powerful character of a black one by being so close for so long in Grain. No help at all I appreciate. hope it gets explained mate
User avatar
Kev L
Posts: 11287
Joined: Tue Aug 24, 2010 9:57 pm
Location: Hertford, England

Re: Could someone do me a favour

Post by Kev L »

BigVeeGrin wrote:strange one this - maybe it's what happens when a Teal one tries to ape the powerful character of a black one by being so close for so long in Grain. No help at all I appreciate. hope it gets explained mate
Good point there boy wonder! The boredom of sitting next to a replica of a coal hole has bored the poor little green one into submission. The only possible cure is to spend time with your bike next to a cool blue bike. come for a ride up'ta ta norf, on the 21st :thumbup:
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
User avatar
scott02464
Posts: 796
Joined: Wed Dec 28, 2011 2:04 pm
Location: Tadcaster- Near York

Could someone do me a favour

Post by scott02464 »

Kev L wrote:
BigVeeGrin wrote:strange one this - maybe it's what happens when a Teal one tries to ape the powerful character of a black one by being so close for so long in Grain. No help at all I appreciate. hope it gets explained mate
Good point there boy wonder! The boredom of sitting next to a replica of a coal hole has bored the poor little green one into submission. The only possible cure is to spend time with your bike next to a cool blue bike. come for a ride up'ta ta norf, on the 21st :thumbup:
Nice bit of a northern accent there mi owd.... Don't know what it means tho lol ;-)
User avatar
Kev L
Posts: 11287
Joined: Tue Aug 24, 2010 9:57 pm
Location: Hertford, England

Re: Could someone do me a favour

Post by Kev L »

Oh yeah mate, fluent in it, me. Could almost be mistaken for a local wiv me cloth cap, whippet and pigeons! Aye oop me'duck an ting innit.
:lol:
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
User avatar
scott02464
Posts: 796
Joined: Wed Dec 28, 2011 2:04 pm
Location: Tadcaster- Near York

Could someone do me a favour

Post by scott02464 »

Kev L wrote:Oh yeah mate, fluent in it, me. Could almost be mistaken for a local wiv me cloth cap, whippet and pigeons! Aye oop me'duck an ting innit.
:lol:
Lol quality!

Me Manchester mate wears a flat cap when he's visiting to get into the culture of things.
Post Reply