Ebay Finds (unusal/cheap/rare/or just good value)

[agentpineapple]

i see ohlins like akraprovic, top quality products, which are designed for each bike, not one product that fits most bikes, and in 3 or 4 years that ohlins shock will still be worth 300 to 500, when other lesser products won't be worth half as much, i still couldn't afford to spend that amount of money on a shock tho
my bike only cost £720

[agentpineapple]

engine for spares only £75 on ebay, might be worth something to someone

http://www.ebay.co.uk/itm/Honda-Firesto ... 416716284e

[pariah]

Just won the 2 sets of short brake and clutch levers in gold and black off e blag for £30 with postage . Any one of here selling ?

[tony.mon]

engine for spares only £75 on ebay, might be worth something to someone

http://www.ebay.co.uk/itm/Honda-Firesto ... 416716284e

Nope, there's nothing of any use on that, except a few bits and pieces, nothing worth £75.
The cylinder's damaged by the piston, apparently, so not in any way rebuildable.

Unless you need a clutch, starter motor and starter sprag/transfer gears, even then it's overpriced.

Rear head could be stripped for spare valves, I suppose.

[seb421]

Anyone feeling wealthy? Come on Seb jump in mate, the Mrs won't know anything about it!!!!!!
-
http://www.ebay.co.uk/itm/Ohlins-Mono-S ... 3cc8dad4b3

no but the bank manager would lol

[marravtr]

Just won the 2 sets of short brake and clutch levers in gold and black off e blag for £30 with postage . Any one of here selling ?

no, but had em in my watchlist but forgot to bid on em!! D'OH!!

[VTRDark]

GP style carbon cans as new...
Worth double checking they are not Dan Moto one's first though.

http://www.ebay.co.uk/itm/Honda-vtr-100 ... 43b1cb7b5f

(:-})

[agentpineapple]

one of the nicest storms i've ever seen on ebay, clean original condition, only 12,600 miles and wp shock......
well worth £2000+ even tho its red

http://www.ebay.co.uk/itm/2003-HONDA-VT ... 1c29520fe4

[Kev L]

Mikos-24 joined the forum for a while but didn't visit much. Nice bike though, bit exy.

[Flatline]

http://www.ebay.co.uk/itm/271005761016? ... 709wt_1185

Got to be good value to someone on here

[VTRDark]

I have them in my watch list already with 6 cans of primer and lacquer as well. Gonna re spray my Fazer once it up and running and bodywork repaired. It will be my practise run for when I do the storm next year.

(:-})

[chric]

http://www.ebay.co.uk/itm/Goodridge-Rep ... 778wt_1263

very nice dont know where they would go like but nice

[VTRDark]

Have a look at Robs custom storm (I went to call it a hawk then )
See where he has used the oli lines. I think they very smart. http://www.vtr1000.org/phpBB3/viewtopic ... pe+hangers

(:-})

[tony.mon]

http://www.ebay.co.uk/itm/Goodridge-Rep ... 778wt_1263

very nice dont know where they would go like but nice

They're a fitting which just clamps onto a round solid metal oil line.
You'd need to hacksaw the oil line about 20mm from each end fitting and then replace the missing metal pipe with these flexible lines.

I've said 20mm, you'll need to see how much oil line can be slid inside the red fitting on each end to make it look as though there's no standard pipe left.

Cheap fix, I paid £75 to have a hydraulic pipe company make some custom ones up.

You could also buy a cheap four-row cooler from an SP1 and do that conversion, if your engine gets hot at times.
Try to get the SP1 lines as well, if you buy a cooler, as they're different. Check diameter before ordering the braided lines, too.
I bodged on Storm fittings; you have to use the Storm bottom end fitting anyway.
SP1 top end fitting is at a slightly different angle, but a Storm one can be made to work.

[Jazzscot]

http://www.ebay.co.uk/itm/Goodridge-Rep ... 778wt_1263

very nice dont know where they would go like but nice

Iv got a set of them goodridge hoses on a spare set of oil pipes I have. Couple of scrapes on the red bits but could be easily rectified, if anyone has the inclination.