greesing etc

[scottyhatchi]

well my bike parts n frame etc will be bak soon so i thought id ask some advice ..

parts to remember to greese ?? wat to use ?? etc places i must not forget . my bike is just an engine at moment so all the frame needs to go bak on etc fully rebuilt lol

[seb421]

My Fav grease is Pro RG2, Red as well so you can see it on stuff



General copper grease

and loctite / thread lock where required

Get a workshop manual if your building it all back up, fairly straight forward but it does come in handy

[AMCQ46]

there is a PDF download of the official honda workshop manual in teh workshop section. it tells you where to grease.

Seb, you can tell you were into dirt bikes by the good quality waterproof grease, no point on putting anything else of the suspension linkages, you need to use the best if they are going under water....... I have the same on my shelf

[seb421]

there is a PDF download of the official honda workshop manual in teh workshop section. it tells you where to grease.

Seb, you can tell you were into dirt bikes by the good quality waterproof grease, no point on putting anything else of the suspension linkages, you need to use the best if they are going under water....... I have the same on my shelf

God knows its seen its fair share of water this storm

[scottyhatchi]

that pro rg2 is that for everywhere on the rod that holds the wheels etc etc

[seb421]

that pro rg2 is that for everywhere on the rod that holds the wheels etc etc

Yeh I use it on most stuff mate

Sent from the Bat Cave via Cup and String

[scottyhatchi]

what ya recoment for the chain ??

[seb421]

what ya recoment for the chain ??

I think it's called wurth chain wax I use or a light cover of general engine oil, but it's all personal preference mate

Sent from the Bat Cave via Cup and String

[tony.mon]

Red rubber grease for all brake-caliper related lube needs, and copper slip where you hope to be able to undo a bolt again in a few years' time.
Lastly, regular and often for all sussie linkages.