So today I fitted my newly braced swingarm. However, after I tightened the nut on the left hand side to the correct torque the bar sticks out too far and means the plastic caps do not fit. Also the swingarm does not move up and down smoothly. Can somebody please post a couple of photos up of the swingarm connection and pivot. The only thing I can think of is that I have missed a spacer from the right hand side but I don't remember taking one off.
Cheers in advance
Neil
swingarm help...
Re: swingarm help...
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
-
MacKrell17
- Posts: 92
- Joined: Thu Apr 16, 2009 8:03 am
- Location: Cheshire
Re: swingarm help...
Brilliant Kev.
I'm missing item 9.
Must be in the bits n Bob's pile dammit! So long as I can find them it should be a simple fix.
Thanks
N
I'm missing item 9.
Must be in the bits n Bob's pile dammit! So long as I can find them it should be a simple fix.
Thanks
N
Re: swingarm help...
That will be sweet and sour pork and egg fried rice.I'm missing item 9.
(:-})
==============================Enter the Darkside