![Very Happy :D](./images/smilies/icon_biggrin.gif)
Thank You
- VTR Marmite
- Posts: 85
- Joined: Tue Jul 28, 2009 11:32 pm
- Location: Hucknall, Nottingham
Thank You
Thanks to every single person on the ride out on Saturday for your help and support. I WILL be back ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Image](http://signatures.mylivesignature.com/54487/389/199E716D4B9DD38A8143E72DD06E32EB.png)
Re: Thank You
Post up the bits you need mate, we may be able to help you out. ![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
Re: Thank You
As said get a list up, I've got quite a few bits that I've managed to pick at good prices and since the other bike can wait a while I could pass on what u need for what I paid, got forks, left fairing, screen, standard cans to get u going and sure there may be a few other bits ![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
Main thing is ur just a bit banged up not badly hurt and being a young bugger you won't feel it for long, you'll soon have the beast back on the road![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
Main thing is ur just a bit banged up not badly hurt and being a young bugger you won't feel it for long, you'll soon have the beast back on the road
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
Last edited by playerone on Mon Sep 10, 2012 10:21 am, edited 1 time in total.
Re: Thank You
I've got the complete front end I swapped off of my 53 plate at 14,000 miles including the later higher bars if you want them. Only the discs missing as I sold them to another member.
Also got levers, lenses etc![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
Also got levers, lenses etc
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
Re: Thank You
Shaun,
Its one of those things that happens, and on any other day it could be one of the rest of us, and I think we all know that and that is why everybody helps out............I did consider offering you a pillion all the way back to Coalville, but that may have been too much punishment for 1 day
To help get everyone started on the spare parts scavenge hunt the wanted list for Marmite will include:
LH footrest & gear lever
LH fairing panels
LH clipon
Forks
Lower yoke
Front fairing subframe
front mudgaurd
LH Mirror
LH indicators
Screen
Those were the bits that are wombles and needed to get the bike on the road, but there were other parts like the Cans, link pipes and clutch reservoir cover, tank etc that are all scratched and will also be needed for a full restore.
Sounds like the ideal time for a USD fork upgrade
Its one of those things that happens, and on any other day it could be one of the rest of us, and I think we all know that and that is why everybody helps out............I did consider offering you a pillion all the way back to Coalville, but that may have been too much punishment for 1 day
![Laughing :lol:](./images/smilies/icon_lol.gif)
To help get everyone started on the spare parts scavenge hunt the wanted list for Marmite will include:
LH footrest & gear lever
LH fairing panels
LH clipon
Forks
Lower yoke
Front fairing subframe
front mudgaurd
LH Mirror
LH indicators
Screen
Those were the bits that are wombles and needed to get the bike on the road, but there were other parts like the Cans, link pipes and clutch reservoir cover, tank etc that are all scratched and will also be needed for a full restore.
Sounds like the ideal time for a USD fork upgrade
AMcQ
- VTR Marmite
- Posts: 85
- Joined: Tue Jul 28, 2009 11:32 pm
- Location: Hucknall, Nottingham
Re: Thank You
....I did consider offering you a pillion all the way back to Coalville, but that may have been too much punishment for 1 day - Yeah my knuckles were scraping on the ground when I got off at the pub
However the list posted by AMQ is about right to get her roadworthy again apart from the screen, as i have an original one in the garage.
So if people would like to let me know prices etc. for the items they have spare I would be really grateful
Again I just want to thank you all![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
However the list posted by AMQ is about right to get her roadworthy again apart from the screen, as i have an original one in the garage.
So if people would like to let me know prices etc. for the items they have spare I would be really grateful
Again I just want to thank you all
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
![Image](http://signatures.mylivesignature.com/54487/389/199E716D4B9DD38A8143E72DD06E32EB.png)
Re: Thank You
I'd suggest copy and pasting the list in the sales and wants section, its probably the most visited section ![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
Re: Thank You
glad it's getting sorted. good to see everyone rallying around, comforting to know there's always help there.
could have been any one of us, except Bazza as he rides like an old man, but not like flatty, 'cos he's a mad old man
![Laughing :lol:](./images/smilies/icon_lol.gif)
could have been any one of us, except Bazza as he rides like an old man, but not like flatty, 'cos he's a mad old man
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
slow is smooth, smooth is fast
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Thank You
i have if you want them .
clip ons (early ones )
lower yoke
the cost would only be to cover postage .
and as your lhs can is damaged it a good time for a 2-1 conversion![Very Happy :D](./images/smilies/icon_biggrin.gif)
clip ons (early ones )
lower yoke
the cost would only be to cover postage .
and as your lhs can is damaged it a good time for a 2-1 conversion
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Thank You
I may be interested in this if you still have it in a few weekslloydiecbr wrote: i also have a nice 2-1 headers it just need a link pipe making to suit
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
Re: Thank You
I was going to say the same thing. Did sound rather niceplayerone wrote:I may be interested in this if you still have it in a few weekslloydiecbr wrote: i also have a nice 2-1 headers it just need a link pipe making to suit
![Cool 8)](./images/smilies/icon_cool.gif)
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Thank You
it been sat there for months all clean rust free awaiting a link pipe
a link pipe only cost £40 to be made .
![Cool 8)](./images/smilies/icon_cool.gif)
a link pipe only cost £40 to be made .
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Thank You
i will covert you allCkennedy wrote:I was going to say the same thing. Did sound rather niceplayerone wrote:I may be interested in this if you still have it in a few weekslloydiecbr wrote: i also have a nice 2-1 headers it just need a link pipe making to suit
![Laughing :lol:](./images/smilies/icon_lol.gif)
let the 2-1 revaluation begin
![Laughing :lol:](./images/smilies/icon_lol.gif)
Re: Thank You
sounds like you can start a small production run on converted headers and link pipes and run up a bit of a profit [to cover the petrol, oil and knee slider debt] ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
AMcQ
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Thank You
AMCQ46 wrote:sounds like you can start a small production run on converted headers and link pipes and run up a bit of a profit [to cover the petrol, oil and knee slider debt]
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)