Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
-
AMCQ46
- Posts: 16742
- Joined: Mon May 11, 2009 4:54 pm
- Location: Worcestershire / Warwickshire border
Post
by AMCQ46 »
cybercarl wrote:Iv just measured to one im sending Carl (measured through the envelope) and the shank is 17mm and works fine ;-)
Envelope turned up today. The key is tiny
(:-})
that will be the one that comes fitted to new Honda CCTs, it has almost no head. should work ok, just harder to turn.
if you need to check any thing when you are doing the mod call my mobile. I will PM it to you
AMcQ
-
scott02464
- Posts: 796
- Joined: Wed Dec 28, 2011 2:04 pm
- Location: Tadcaster- Near York
Post
by scott02464 »
AMCQ46 wrote:cybercarl wrote:Iv just measured to one im sending Carl (measured through the envelope) and the shank is 17mm and works fine ;-)
Envelope turned up today. The key is tiny
(:-})
that will be the one that comes fitted to new Honda CCTs, it has almost no head. should work ok, just harder to turn.
if you need to check any thing when you are doing the mod call my mobile. I will PM it to you
It is mate, I used it 4 times and worked fine. Although as you say I would be kinder on the fingers with a bigger head
Glad it got to you fine Carl ;-)
