Ducati 750ss First time project

[CB_Phil]

Do like those exhaust, really suit the look of the bike

[Flatline]

Earlier in the project I designed and made my own headlight bracket:




However it needs some adjustments, which takes time

So in the meantime I have purchased some ready made brackets

I can get on with other things to make the bike roadworthy, then make a new bracket later



Not the right look though

[agentpineapple]

i think it looks ok mate, but you know what you want, when do think the bike will be road worthy?

[Flatline]

Thanks Marty

I would hope to complete it before I die

Or by this summer

[VTRDark]

Your just want to beat marty's record I prefer the Black brackets you've fitted but that's just me. You obviously have an overall look that your envisioning.

(:-})

[agentpineapple]

Thanks Marty

I would hope to complete it before I die

Or by this summer

tell me about it mate, mines about to run into the 3rd year, although it was running for most of last year....

[MacV2]

tell me about it mate, mines about to run into the 3rd year, although it was running for most of last year....

Albeit on one cylinder !

[agentpineapple]

tell me about it mate, mines about to run into the 3rd year, although it was running for most of last year....

Albeit on one cylinder !

i still hold the record for fastest single cylinder firestorm at brands hatch......

[Flatline]

Stripped down the front calipers



Spraying the footrest hangers in the paint booth



Cut the frame at the end

Shaped some frame parts to make the "V"



You may remember I bought some indicators to fit in the end of the frame: Voila!



Will check what it looks like with the frame joined to the end rather than as a "V"

[VTRDark]

Loving the paint booth. You just need a couple of hairdryers poking through the sides. Don't worry about extraction as fumes are good

(:-})

[Flatline]

[sirch345]

Keep up the good work Flatline

Chris.

[Flatline]

Maybe I can get it ready for the ride out in May

[lloydie]

every little helps

[Flatline]

I need some tubing for the cafe racer project

The frame is 25mm which I am finding it hard to source

Anyone know where I can get a metre of the stuff?