Just got my old blade wheel

[thumperslaw]

Six spoke for the rear. Sprocket drive axle et
What do I need to do when fitting it to the storm

[Jonesey]

Just put it on the bike, it's a straight swap.

[lloydie]

Just put it on the bike, it's a straight swap.

+1 same fitment

[thumperslaw]

Next up what about the front?

[Stephan]

Next up what about the front?

VFR 750 94-97, CBR600F3

[thumperslaw]

Next up what about the front?

VFR 750 94-97, CBR600F3

Disc from the storm work I take it?

[Stephan]

Yes, should be direct fit, same as Blade rear wheel.

[lloydie]

Have a look in the stickys as I posted up what wheels fit

[agentpineapple]

http://www.ebay.co.uk/itm/Honda-Firebla ... 27d031b1db
http://www.ebay.co.uk/itm/Honda-Firebla ... 27d031c4d2
very cheap, but remember they're normally a little buckled, factor in bearings and p/c or respray....

[thumperslaw]

Keeping my eye on them now.
Will have them painted any way

I want to keep the storm on the road so I'll use the storm wheels while i get them sorted

[Stephan]

Have a look in the stickys as I posted up what wheels fit

I believe you miss VFR750 93-97 in your list, like this one

http://www.ebay.co.uk/itm/HONDA-CBR-600 ... 2328470ae6

[thumperslaw]

Have a look in the stickys as I posted up what wheels fit

I believe you miss VFR750 93-97 in your list, like this one

http://www.ebay.co.uk/itm/HONDA-CBR-600 ... 2328470ae6

How much!!

[lloydie]

I didn't put that one in as no one confirmed it fitted without mods
Or if they did I forgot !

[Stephan]

bearings, brake discs, and spacers, are the same for VTR1000F and VFR 94-97, CBR600F3 as well, you can verify this. No offense ... :-)

[agentpineapple]

i doubt you'll find any cheaper than £50, they normally go for around the £100 mark. personally i'd snap it up, make sure you ask the seller about its condition first tho, older front wheels are usually slightly buckled....