Replacement Regulator/Rectifier

[Tekram La]

Looking to replace my standard fit R/R, Is it still the case where the Yamaha R1/R6 is a better option than an upgraded finned version Genuine Honda part?

Thanks

[Wicky]

Search for MOSFET

[VTRDark]

The R1/R6 ones are rock solid. http://vtr1000f.wickidnet.com/ better still if you can afford a MOSFET one were the regulator half is seperate from the regulator half. They have two separate plug connections

(:-})

[Tekram La]

Search for MOSFET

Cheers Wicky, certainly the business but come at a cost especially when you add shipping. Will have a further look see if I can find any second/hand ones closer to home.
Got a wish list for a few mod's but unfortunately not the budget to match it

[agentpineapple]

check this link out buddy
http://www.vtr1000.org/phpBB3/viewtopic ... or#p262169

[Tekram La]

The R1/R6 ones are rock solid. http://vtr1000f.wickidnet.com/ better still if you can afford a MOSFET one were the regulator half is seperate from the regulator half. They have two separate plug connections

(:-})

Thanks for that mate, I had just read that link before posting was checking to see if it was still a good option. If cash was flowing would go for the Mosfet which seem to being widely used by Yamaha.

[VTRDark]

check this link out buddy

A.....ARRRR (buzz buzz) try again.

you will notice that the post requirement has been increased from 10 to 50 before you can enter the Sales and Wants section.

(:-})

[agentpineapple]

oh yeah, forgot about that.......
sorry if i've balls'd up, it was unintentional.....
i'll go sit on the naughty step

[Tekram La]

check this link out buddy

A.....ARRRR (buzz buzz) try again.

you will notice that the post requirement has been increased from 10 to 50 before you can enter the Sales and Wants section.

(:-})

Ahaa i had seen that to. along with a few others recently, a little bit frustrating............

[Tekram La]

check this link out buddy
http://www.vtr1000.org/phpBB3/viewtopic ... or#p262169

Not trying to get me in trouble Thanks for the link tho.

[sirch345]

This topic has been moved, to the "Workshop" section,

Chris.