revolution forks

[edds11]

that was one of the main defining factors callum, you cannot buy the little stickers, roger only puts them on tuned forks

[edds11]

but he has stopped doing it about 2 years ago, so no more little stickers for anyone

[callam_nffc]

oh that's probably why mine have no stickers, I don't think it was that long ago they were done lol

[AMCQ46]

but he has stopped doing it about 2 years ago, so no more little stickers for anyone

so that is why I didnt get the sticker either

[edds11]

yes probably so, problem is my fork stanchions look like SH 1 T but if I clean and repaint them I will loose the ikle stickies

[lloydie]

yes probably so, problem is my fork stanchions look like SH 1 T but if I clean and repaint them I will loose the ikle stickies

Don't pant the stanchions as the forks won't work and you will blow the seals in seconds :shock:

paint the lowers :-)

[edds11]

best advice so far, cheers loydie

[VTRDark]

I smell a hint of sarcasm there. I thinking you meant the lowers when you said stanchions. I just etch primed some lowers the other day ready for painting. I'm going to use brake calliper paint. I figured it would be hard wearing and resistant to chemicals and stuff. Hammerite takes forever to dry solid enough before it doesn't chip easily. I also dont like the way the spray Hammerite applies, it's too thin and requires lots of coats.

(:-})

[lloydie]

Could you mask the stickers up ?
Or even take a good picture of one then photoshop it and have some made if Rodger can't supply new ones .

[edds11]

to be fair they are that scabby the stickers are nearly peeling off, I could see about getting some made but I dont know if copyright would be infringed ...and loydie I would never ever ever want to PANT a stanchion

[ging500]

but he has stopped doing it about 2 years ago, so no more little stickers for anyone

Bloody credit crunch is getting everybody!!

[lloydie]

Pant lol or is that doh :-)

[Roger Ditchfield]

I was pleased to be able to help Paul with his quest. It is some time since I used stickers on my forks because I had to order them in batches of 500 because they have to have special adhesive due to the heat generated in an operating fork and I expected to be retired by now!!! If anyone wants to print their own or know of a decal printer that will make them for me in batches of 100 I will email you the Revolution logo. Alternatively contact me on roger@revolutionuk.co.uk as I do not know how to add an attachment to this reply. Cyberman???

[VTRDark]

Cyberman at your command Unfortunately the forum admin have not enabled privileges to add attachments. But I shall PM you my private email address and if you want to send the graphic file I will post it up if that's OK with yourself, so it can be downloaded and others can get it printed if they wish to do so.

(:-})

[callam_nffc]

ill quite happily buy some if anyone has some made

(god im sad ;) )