
P1's in need of help beastie
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
P1's in need of help beastie
Running very lean I think
Re: P1's in need of help beastie
yeah that's what the guy said
Re: P1's in need of help beastie
What's in the carbs at the moment, what's your set up? Needles, jets, air filter etc. That shoots right off at at 4 thou. You recent engine mods would have made a difference so you need to get them carbs dialled in to suit.
(:-})
(:-})
==============================Enter the Darkside
Re: P1's in need of help beastie
I believe it's been dyno jetted and running k&n filter, no idea what needles, jets etc are in there.
The bike as it stands now :-
carbs - dyno jetted - no idea what is used
cbr stick coils
k&n filter
inlet cams replaced with exhaust cams
delkevic 8" stubby cans
The bike as it stands now :-
carbs - dyno jetted - no idea what is used

cbr stick coils
k&n filter
inlet cams replaced with exhaust cams
delkevic 8" stubby cans
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: P1's in need of help beastie
you need to get it set up soon before you damage it running it lean like that .#
try sticking stock air filter back in
try sticking stock air filter back in
Last edited by lloydie on Mon Jul 15, 2013 5:19 pm, edited 1 time in total.
Re: P1's in need of help beastie
i would stick the standard filter in a a quick fix, that will be worth 1 to 2 AFRs as that how much it richened mine when I swaped it on our dyno day
AMcQ
Re: P1's in need of help beastie
If you don't want to go digging in and playing with the carb settings for a quick fix I would ditch the K&N and put a standard filter in and this will more than likely get rid of the 4thou
and will also richen things up for you by giving things less air flow. I wonder if the slides have had the extra lift hole drilled out according to the dynojet destructions.
Al beat me too it
(:-})

Al beat me too it

(:-})
==============================Enter the Darkside
Re: P1's in need of help beastie
was going to ask if going back to standard filter would help any, not overly keen on pulling the carbs apart and not being able to get them all back together again

cheer's


cheer's

Re: P1's in need of help beastie
thats yellow bikes vs black for you Carlcybercarl wrote:Al beat me too it![]()
(:-})

AMcQ
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: P1's in need of help beastie
but green was there firstAMCQ46 wrote:thats yellow bikes vs black for you Carlcybercarl wrote:Al beat me too it![]()
(:-})

Re: P1's in need of help beastie
are we talking about Virt again?lloydie wrote:but green was there firstAMCQ46 wrote:thats yellow bikes vs black for you Carlcybercarl wrote:Al beat me too it![]()
(:-})

AMcQ
Re: P1's in need of help beastie
Green and Yellow got there at the same time, if that's the caseAMCQ46 wrote:
are we talking about Virt again?

Slowly approaching the more bikes than birthdays achievement
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: P1's in need of help beastie
might as well beAMCQ46 wrote: are we talking about Virt again?
