929-954 break rotors?

[grumpyfrog]

I'm in need of break discs\rotors for the front end for my 929 swap and have checked a few of the suppliers to check the part numbers. Apparently they are the same. can anyone else confirm if they are or not as I know "SOMEONE"on here that has 954 one's for sale?

[ebenviljoen]

agentpineapple has a set for sale mate. 100 quid I think. look in the items for sale bit, was still there on friday

http://vtr1000.org/phpBB3/viewtopic.php?f=38&t=30034

[agentpineapple]

i was led to believe the 929's are 320mm and the 954's are 330mm, i'm not 100% sure tho, also the 929's are black and the 954's are gold.....
and yes mine are still for sale as i fancy some wavy discs....

[Tweety]

i was led to believe the 929's are 320mm and the 954's are 330mm, i'm not 100% sure tho, also the 929's are black and the 954's are gold.....
and yes mine are still for sale as i fancy some wavy discs....

Those measurements check out...

[grumpyfrog]

yes, those were the ones I were referring to. AP and I had had a conversation about this, still confused about why some dealers have them under the same order code?
will just have to be certain to ensure that I get 320mm one's.
Cheers all.

[Tweety]

yes, those were the ones I were referring to. AP and I had had a conversation about this, still confused about why some dealers have them under the same order code?
will just have to be certain to ensure that I get 320mm one's.
Cheers all.

Same reason that you can buy fairings for VTR 1000F SP1, SP2... They are too dumb to know the difference...

[mik_str]

929 and 954 both had 330mm rotors, SP-1 and SP-2 used 320mm rotors. All use the same bolt pattern and offset I believe (99.9% sure)...

[seb421]

Both the 929 and 954 had 330mm Rotors / Discs

The 929 had a black centre carrier with the 954 having a gold one

Before the 929 they had 310mm fitted and after the 954 they used 310mm again on the RR4 RR5 and then 320mm again on the RR6 - onwards

[mik_str]

310mm rotors were used in 98-99 only, previous to that, they ran 298 (or 296, depending on who you ask) just like the VTR.

[agentpineapple]

yes, those were the ones I were referring to. AP and I had had a conversation about this, still confused about why some dealers have them under the same order code?
will just have to be certain to ensure that I get 320mm one's.
Cheers all.

why do you need the 320mm ones when the 330mm will fit and i assume be better.....
the ones i'm selling are 330mm gold 954 discs, just so theres no confusion, they're yours if you want them, you have a pm mr grumpy....

[seb421]

310mm rotors were used in 98-99 only, previous to that, they ran 298 (or 296, depending on who you ask) just like the VTR.

i didn't go into detail before the 929 because who wants to put near standard breaks on,

the 954 i had on mine got a lot of attention, peoples be like dammmmmmm those some big brakes son!